Search results

  1. M

    Sharp LC32D62U

    akshatp thanks for your input
  2. M

    Sharp LC32D62U

    thanks anyway guys...
  3. M

    Sharp LC32D62U

    I been shopping around on the net for I new tv. What I'm looking for 32in HDTV lcd that I can mount on the wall and use for hooking up xbox 360, ps3 and my pc. I ran into this tv Sharp 32" LCD HDTV LC32D62U which has native 1080p and 6ms response time. Question is if that tv would be a good...
  4. M

    New Dell Computer, Can't use dual display

    Gothgar you can open the case to try and fix it your self thats why there is online guides on dell web site, the only thing is if you break something inside your computer while not on the phone with a dell tech, dell wont replace the part. And no you don't need to be dell certified ether...
  5. M

    How to cut up my aluminum case??

    If you have a Drill get a Hole Saw 3" might find a new one on ebay, then get some trim about 9 1/2" (9.5")
  6. M

    My Computer SUX!!!

    And yea I see why some people would say something like that when they see the title then look at my rig. But I got my hopes up thinking maybe I would get a little more out of it and just got less. :P
  7. M

    My Computer SUX!!!

    I think a few other people would be a little upset if they just spent $145 on a PSU and getting the same results as I was with my other cheap $5 PSU that came with the case. Oh and AVP have fun with your new rig.
  8. M

    My Computer SUX!!!

    LOL yea but I would like to hit 3.4 well I'm able to but just not stable.
  9. M

    My Computer SUX!!!

    Ok I have an OCZ 520W PSU and the little LEDS on the back look like they are yellow but they look green too so I'm not sure what they are but the LEDS look green I guess. I will get a picture later and post it.
  10. M

    My Computer SUX!!!

    Oh no if I change the divider and won't even post even if it at 201 FSB.
  11. M

    My Computer SUX!!!

    No I'm just a little upset tha after getting a new PSU I'm unable to go any higher. And now when I try to up the voltage on my cpu that at 285 = 3.4 my computer wont post. So like right now I have it at 280 = 3.360 2.8 vdimm and cpu voltage at 1.520
  12. M

    Sempron or Celeron?

    sempron is cheaper and faster then celeron D's. btw the only reason AMD is beating INTEL because INTEL is to busy forkin around with all the new stuff they are coming out with, like the chipsets, pci express bull and all them other play things.
  13. M

    My Computer SUX!!!

    I think I'm going to take a hammer to my $1500 computer lol I don't even remember how much I spent on it but it's around that #. So anyway I'm thinking on O/C my fat cat, what do you think?
  14. M

    Pathetic O/C results winchester 3000+ on A8V

    try and get a new PSU something better then what you got, look in to a antec true480 or something
  15. M

    Best way to hook up computer to TV

    yea I have it on NTSC its pluged in good but what I see is \\\\ lines across the screen and snow.
  16. M

    Best way to hook up computer to TV

    Maybe its my cheap a$z cable
  17. M

    Best way to hook up computer to TV

    sux, its snowing btw I can't get it to run on 640x480 edit: yea I got it in 640x480 but it's still snowing so any other video device I should get
  18. M

    Best way to hook up computer to TV

    I'm goin to test it out one more time ;)
  19. M

    Best way to hook up computer to TV

    My Tv is not LCD
  20. M

    Best way to hook up computer to TV

    I have a 9700 pro with the svideo cable but I hooked it up and I had a lot of HR lines
  21. M

    Best way to hook up computer to TV

    What video card or video device should I get to hook up my computer to TV I really just want to watch my dvds on my tv. also looking for a nice 19" LCD that anyone would recommend.
  22. M

    Anands X850 Article is up

    Ati crazy I like'em but they crazy. A good thing may come from these new models is that when they do come out the x800 models prices will go down hopfully.
  23. M

    LanParty Pro875B 5:4 divider O/C problem

    I just noticed that I had spread spectum and auto detect pci clk enabled so I disabled them, I got the same results but my system became more stable and I was able to get further in the 3dmark benchmarks. Also noticed while using cpuz that my cpu voltage was jumping up and down like with the...
  24. M

    LanParty Pro875B 5:4 divider O/C problem

    Well at least I got the ram running at its rated speed. but I'm going to play with it later see what happens.
  25. M

    LanParty Pro875B 5:4 divider O/C problem

    Yea it post with a 1:1 divider crazy huh. with 2.8 vdimm I got it up to 3.4 but it crashed in 3Dmark03 and 05 close to the end of the benchmark. I asked DFI what bios they recommend but no answer yet.
  26. M

    LanParty Pro875B 5:4 divider O/C problem

    I have a LanParty Pro875B Rev. A mobo I o/c it already w/ 2.4C @ 3.32 (277FSB) and voltage is default. I have my vdimm at 2.7. I got it up to 285 but was unstable even tried vdimm at 2.8 also raising cpu voltage and it was unable to, so then I started over went back to stock setting then tried a...
  27. M

    When o/cing should I use pagefile?

    The only reason why I asked this was because I was running prime95 and a thing poped up saying I need it on to run the test. thanks guys
  28. M

    When o/cing should I use pagefile?

    I just upgraded my computer with my new HSF and I forgot I turned off my pagefile and I was wondering if I should set it back up. really it was a question and then I was just stating what I was doing, besides I know the pagefile has nothing to do with my memory frequency.
  29. M

    When o/cing should I use pagefile?

    well should I? I o/c my 2.4 to 3.360 = 280fsb, its the most stable I got and I don't post above 285 also I had to raise the vdimm to 2.7 to get a 280fsb and have to do 2.8 if I go any higher.
  30. M

    Anandtech 90nm vs 130nm A64 review

    I just read that review but I wish they gave more info on the intel setup they used. I might build my next system with one of those new processors mostly the 3000+ because it's cheaper. :)