Search results

  1. M

    barton 2500+ heatsink

    how about this fan then I did see this 60mm fan http://store.yahoo.com/svcompucycle/ys406034pin.html
  2. M

    barton 2500+ heatsink

    heres another ? should the fan be blowing on or away from the heatsink
  3. M

    barton 2500+ heatsink

    ok got the new hs but the fan isn't big enough so have to upgrade that. it came with a 60mm fan so have to get an adapter and put a 80mm on it. temps before chnge were running up again to 52c with new sink 45c but not constant without load. have not checked with load yet due to I think to hot...
  4. M

    *Poll* Do you have "A Guy" for you car repairs?

    I thinks the saturn was liek a l2 or somthink like that but still the price they were charging for parts was more than twice my cost and were still higher if he would have gone and got the part @ the same price without my acct (I think retail was like at the most $180-200) I do go by labor...
  5. M

    *Poll* Do you have "A Guy" for you car repairs?

    ok this is just funny. I know its the wrong forum so here's my comment.... I have automotive training and have been working on cars since I was like 12.... I learned about auto mech from my step dad which has always had a wrench in his hand and he is still in the automotive field. "and now I...
  6. M

    new to overclocking

    Ok I have made a decision I have ordered the coolermaster alps silent heat pipe for $28 from gameve.com will post my temps when get it
  7. M

    barton 2500+ heatsink

    Ok I have made a decision I have ordered the coolermaster alps silent heat pipe for $28 from gameve.com will post my temps when get it
  8. M

    barton 2500+ heatsink

    I like the alx and appreciate you recomending but can not find in stock, but here are some that I am looking @ and can't find a good review site. 1. thermaltake volcano 10+ and up to 12 2. ocz gladiator 3. pc toys quiet max 5100(listed @ svc) 4. cooler master alps silet heat pipe was...
  9. M

    new to overclocking

    Ok you guys or gals here's my current pc antec plus 1080 amg-with 2 rear exhausts fans, 1sid intake fan for graphics card, 2 fron intake fans(side and front fans are pc toys 52.6cfm) gigabyte 7n400 mobo athlon 2500+ baton 30th week '03 build geforce fx 5600 graphics card 1 80gig maxtor hd...
  10. M

    barton 2500+ heatsink

    Ok you guys or gals here's my current pc antec plus 1080 amg-with 2 rear exhausts fans, 1sid intake fan for graphics card, 2 fron intake fans(side and front fans are pc toys 52.6cfm) gigabyte 7n400 mobo athlon 2500+ baton 30th week '03 build geforce fx 5600 graphics card 1 80gig maxtor hd...
  11. M

    barton 2500+ heatsink

    oh forgot I had the 2 front case fans in backwords due to no directional infor inclued so now cpu running @ 48C
  12. M

    new to overclocking

    oh forgot I had the 2 front case fans in backwords due to no directional infor inclued so now cpu running @ 48C
  13. M

    new to overclocking

    bump
  14. M

    barton 2500+ heatsink

    seen that one on soemother boards but have been seing this on alot too ALX-800
  15. M

    new to overclocking

    please check post in cooling for some ideas I thought may work and also how should I set the multiplier when I get it cooled down and want to oc should it be for instance 333*5.5 or 166*11
  16. M

    barton 2500+ heatsink

    just though I would ask
  17. M

    barton 2500+ heatsink

    ok for those of you out ther my current temps are cpu 52-53c mobo 30c this is all non load I had the heatsink backwords (my bad) was 82+c I have gotten a few replies re the alx-800 an have be definately contemplating it but how about these heatsinks with fan *COOLER MASTER JET 7+ PREMIUM...
  18. M

    barton 2500+ heatsink

    only prob here is my mobo doesn't have the 4 holes for bigger heatsink
  19. M

    barton 2500+ heatsink

    I am looking for the best heatsink for air cooling for my barton 2500+ on a gigabyte 7n400 pro 2 ver 2 mobo
  20. M

    new to overclocking

    ok thanx for the input. Now another ? what would be a good heatsink and fan?????
  21. M

    new to overclocking

    ok now got it set @ fact speck 333*5.5 running about 53c. I am assuming that this will cool dowm after the therml compound set in
  22. M

    new to overclocking

    factory no coolermaster htk-001 high performance and I found out that the heatsink was not seated properly
  23. M

    new to overclocking

    anybody have an idea
  24. M

    new to overclocking

    ok I'm up and runnign barely. According to aida32 my cpu temp is 82C my motherboard temp is 38c and it list an aux @ 34c and is only running @ 100mhz and when I switch the bios to 133 it shuts down I believe to heat but I don't know why its so hot i got thermal compound on it maybe it...
  25. M

    new to overclocking

    thnx hope it works will post when complete-loging off for the 1st time in mote than 3months
  26. M

    new to overclocking

    bout the second ? re setup for drives
  27. M

    new to overclocking

    I don't have the mobile version unfortuantly-cause the chip is comming form an HP CTO PC. And should I set up everything as it to maintain the drive letters with my current set up or what should I do cause I have everyting in the start menu for my games, movies, music which is all on my...
  28. M

    new to overclocking

    pls some help here
  29. M

    new to overclocking

    Ok here's another ? for ya....ON my board it came with 4 ide controlers and 2 sata ports and I also have an ide pci card that came with my second hd. Heres my prob...I am wanting to run a dvd rom, cd burner, dvd burner all seperately and I have 2 hard drives that already have info on them and...
  30. M

    new to overclocking

    I got the 7n400 pro 2 version 2 and it came with a sticker for the case that shows all the multipliers from auto which is the default to 18x
  31. M

    Which revision is my Gigabyte GA-7N400 Pro2?

    easy way to tell rev 1 has a fam on the northbridge set and rev 2 has just a large heatsink
  32. M

    new to overclocking

    any input anybody is appreciated
  33. M

    Which revision is my Gigabyte GA-7N400 Pro2?

    version 1 has a fan on the northbrige and versin 2 has just a large heatsink
  34. M

    new to overclocking

    On my the 7n400 pro2 ver.2 you can manually set the multiplyer on the mobo it self and change settings in the bios as well but not by alot so I know that I won't be able to do some heavy overclocking but that wasn't my biggest concern but wanted to do some and its better then my current mobo...
  35. M

    new to overclocking

    I have a gigabyte 7n400 pro2 ver.2 mobo and a athlon xp 2500+ barton cpu and 2 stick of 256mb ddr ram 2700. what would be a good stability to run or how or what should I start with the pc will be put together on fiday for testing. Any help would be greatly appreciated
  36. M

    mobo help please

    I currently have an asus a7n8x-la mobo and am looking @ xfring cases. and I have found that it is missing a white wire from the ps in the current case will this be an issue when xfrd
  37. M

    Socket A

    thnx for the input. was undecided so was looking to see what else was offered and everywhere I posted cam up with the abit, shuttle, asus, and a gigabyte, only seen the dfi here buth that is the most expensive for my pocket. but am more seriusly looking @ the shuttle. I checked out some...
  38. M

    Socket A

    still needing some help
  39. M

    Socket A

    yes I am still lokking for recomondations. They have all been good butam looking to see some other rec on mobos. I'm kinda picky cause it will be a long time if I get this before my wife will let me buy an upgrade. I had just planed on making the xfr and possibly next year upgradeing to athlon...
  40. M

    Socket A

    *bump*