I have 2 2005fpws and to save some space I need 1 to run 1680X1050 and another 1050X1680. When I turn 1 monitor 90 degrees the monitor menu shows 1050*1680, but in windows it still works as 1680X1050 and there is no resolution as 1050X1680.
Am I doing something wrong?
Thanks
Hi, I have a OCZ5002048ELGEGXT-K 2X1gb sticks. It autodetects 3-4-3-7 with 2T timings, I'm running it @ 235mhz with memory divider. After computer runs some time the blue screen comes out with:
PFM LIST CORRUPT
blah
blah
blah
stop: 0X0000004E (0X0000008f, 0X0007DCA2, 0x00000000)...
OK, Here is whatg I have:
9npa+
opteron 146 with XP120
2X1gb OCZ ddr500 ELGEXT
On CPU I can get either 2800(280X10)@1.58v 43c load. with memory 3336@~230mhz
or
2880(320X9)@1.6v 45c load. with memory 3336@~210mhz
I was told that I should get ddr500, but it seems like most ddr400 can...
Sometimes it runs fine - sometimes it doesn't even start.
When I quit the game - sometimes it's fine, sometimes the screenstarts blinking and I have to push reset button
Any suggestions??
I have:
epox 9npa+ ultra
opteron 146 @2.8
evga 7900gt @ 570/1600(450/1320)
Thanks
OK, I got powerstrip, but the highest settings are 598/878(1756). And one more thing - how do I check at what speed the card is working??? the coolbits still show 450/1320
I have a evga 450mhz 7900gt.
the nvidia software doesn't let me overclock it past 545/785 - it tells me that I must run their test and test obviously fails.
what to do?
Here is my setup:
Epox 9npa+ultra
opteron 146 +XP120 with 120mm fan
OCZ ddr500 2x1gb 3-4-3-8
After 2 days of work on my new computer I've got 2 results:
280X10=2800 @1.62v with memory timings 3-3-3-6 @233.3mhz prime95 stable
or
265X10=2650 @1.58v with memory timings 2.5-3-3-6...
Well - there is a ram configuration ddr500, 433, 400, etc. As I've read it supposed to be like 4/5, 7/8 or something like that
I don't know what to do next - what to do with htt which is 3 and what to do with ram.
Thanks
Running prime95 for 2 hours 45c with xp120 and 120mm fan.
mb is 9npa+ ultra.
I can probably push it further but I'm afraid to raise voltage. Previous stable prime was 2.75 @ 1.5v
Also, If I decide to stop at this point what do I do next??? my htt is 3.
RAM is running at 166mhz it's...
I did a search, but no luck.
I have:
9npa+ultra 12/21/2005 bios
opteron 146 w/xp120
seagate 160gb SATA2 HDD
WD 250gb SATA2 HDD
x1800GTO
OCZ DDR500 2X1gb
Windows hangs on start up - I just installed windows, started to do uptades and after one of updates I can't boot up...
topic says it all.
I like to play games.
My $260 order for xfx 7900gt is pushed to 7/2006, so I'm going to cancel it.
MY new rig is complete, only video card is missing.
Any suggestions apprecited. I'd take something that unlocks as well.
Thanks
I've ordered xfx 7900GT today for my new computer. My PSU doesn't have PCIE power plug - I know that there are adapters that put 2-4pin hdd power plugs into 1 6pin PCIE.
I just don't want to receive a card and then look for adapter if it doesn;t come with it.
Thanks
Hi, I've been browsing through this forums for 2 days, but can't decide which mobo to take.
Please point me to the right direction.
Here is what I have:
Opteron 146 939 OEM - Arriving tomorrow
Thermaltake K450 for cooling here
2GB ddr500 of OCZ ram here
XFX 7900GT Extreme edition pci-e...
nec 3540 dvdrw
dell 2005fpw
Keyboard, mouse & dell 5650 sound
160gb ata hdd
That's basically everything that's left from my old system
I have a case with 500w power supply by ultra
Opteron 146 ordered
The computer will be used for a little bit of everything - games/video...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.