i currently have a hd 3870 in my s939 system right now. was thinking about upgrading just the video card for right now. would i alreday be maxed out with the 3870 or could i push my rig a bit further with a 4890 or maybe 5850. i am looking for a card around $200. i am running vista 64 with a...
i have a kensington bluetooth radio because the one shipped with my dinovo laser desktop recently died. with the new radio, setpoint doesn't recognize the mouse & keyboard. is there any software that i can use to assign buttons.
i currently have xp sp3 on one drive and wanted to install vista on a completely new drive. I booted from the DVD to do a clean install of vista onto the new drive. I received no errors or whatnot during installation. However, when i removed the DVD from the drive, i get a system disk error...
i would like to know if it would be worth my while to attempt to replace the stock TIM with some arctic silver or mx-1. I have the visiontek 3850 512mb editon.
i currently have ati 2600xt 512mb and am getting a lot of artifacting recently even at 2d temps. i am thinking about upgrading the card to a 3850 512mb but they are about 190, or would it be better to get a 2900pro 512mb for about 140. i do play fps like unreal tournament 3 and crysis, and...
i purchased a copy of home premium x64 and would like to install it on the comp that already has xp sp2 x32 on it. can i just merely install the other os on another partition on the disk? Also how could i migrate certain programs like adobe cs2 or video games?
i was looking to get the zalman vf900 for my HD 2600xt but am unsure if it will be compatible. Zalman's website does not list any new ATI cards for compatiblity yet. Or do you have any other suggestions?
I have been having stability issues, stops responding occasionally while under load in...
is it worth the additional 80-100 bucks for the x1900xt??? You can get the x1950pro 512mb for under $200. Or would i be better off getting a 7900gto or something else?? i dont want to spend over 250.
they are both about the same price ~$200, which should i get upgrading from a 3000+. i am not an overclocker, i play some RPG and some FPS, as well as video encodingand photo editing.
is it possible to change the htt on my 3500+ to 250 and run a 5:4 divider to continue to keep my ram at stock everything. I have a DFI Ultra-D and patriot 2-3-2-5 at 1t. Is there anything that i am overlooking? Am i going to have to increase the vCore?
i have been using my 56k modem for a little while now, but everytime i try to connect to the server, i usually get an error 691 saying that my usrename is not found in the domain. is there anything that i can do to remedy the situation.
windows gave me an alert saying that it was unable to enter hibernation. and now the option is removed from the power option menu. is there anything i can do to restore this option?
i already have a x800xl on a dfi nf4 ultra-d, and i was thinking of getting another x800xl for under 200, rather than selling mine and buying a new x1800 or x1900. it is really worth that much more dough?
if i can get a 6800nu for around $150 and then unlock it, should i get it...or i could get a refurb x800pro for around $180. is the performance gap worth the extra 30 bucks. I need the AGP version for my MSI Neo 2 865pe
i currently own an audigy 2 zs platinum. however i was considering buying in the future the new X-Fi for my games, movies, mp3 playing, etc. the 5.25 box looks strikingly similar to the audigy 2 box. can i just buy the mp3 X-Fi one and connect it to me zs box?
anyone else have the same problem. i am connecting through a dorm 100mbit connection. i never had any problems until my gf downloaded and installed it onto my comp. thanks
i am a n00b when it comes to overclocking. i have a 3500 venice on a dfi ultra-d. i am only looking to push my cpu to 250fsb. however i would also like to run my memory at that speed too. can anyone help me with some sample timings? i am running 2-3-2-5 at 2.6v at 200mHz.
i have the powercolor one with the pci-e power connector. it is at 480/500 stock. but since i added a vf700 alcu i have been able to get 520/530 stable. is there anything i can do, especially to cool te gpu ram? thanks.
i have a small budget for my folks between 400-500. i can build on for them in that price range with a 2800 palermo, maybe even 3100. however there have been a few desent sales at office depot and compusa this week and i am tempted to buy this eMachine comp or a Compaq. both are comparable...
i have an x800xl on a dfi ultra-d and standard 80mm fans don't fit into the slot so i have to resort to putting it on the inside of the duct, this restricting airflow. has anyone resolved this issue???
any suggestions for the best choice for under 200ish...? i would like an slr-like one, but my wife wants a compact. i have seen some that sort of bridge the gap so to speak. i would likr 5x optical zoom because digital zoom is worthless. does anyone have any experiences good or bad?
whenever a cd/dvd is present in the drive the sataus light on the front of the benzel, blinks twice withe the orangish led. why is this? also windows xp pro recognizes it as a cd-rom and not a dvd-rw.
i ordered my sleeving kit and a molex extractor, however my psu contains 4 sata power connectors and i am stumped on how to remove them from the cable.
i got all the parts needed for my a64 gaming pc, but i have yet to decide if i will make the switch to x64 or stay with xp pro. is it worth the trouble of searaching for drivers even though they probably don't even exist yet? or should i stay with reliable xp pro?
in roder to download x-64 edition of xp pro, you have to receive the confirmation e-mail, but i sent it to my yahoo account as well as my college account and have yet to get anything for about 5 hours now. is there something else i can do?
so far i have a maxtor ultra 16, an audigy 2zs platinum, plextor 716a and and NEC 3520. for my case i am going to get the thermaltake Viking because of the window and the dual 12cm fan with control. and for a psu, probably antec neopower or trueblue 2. However i am still in need of everything...
i am looking for the best ram for my new system. DFI lan Party NF4 Ultra-D, and amd64 3500+ Venice Core, and a Sapphire X800XL. i will be overclocking the memory and am hoping for CAS 2 RAM.
i have yet to buy parts yet, but i am planning on getting a dfi lanparty ultra-d with amd64 3500+ venice core. i am looking to get the redline memory from mushkin because i was very satisfied with the older pc2700 blue that i have had in my current pc for 3 years. Redline. is this price too...
i have a 9600xt and the stock cooler is not keeping my temps down, last night i got 70C and i have decided to go zalman again since i adore the Flower CPU heatsink, and i might want to get one for my vga. or maybe the new heatpipe cooler. i am also looking for it to be transferred to a...
i am interested ina getting the san diego when it comes out for the 3700+ and the price gets lower, but the mobo's only support up to ddr400. is it possible to put faster ram in there to support my overclock? like say some pc4000?
is it better to get 1 realyl kickass card like the 6800ultra or get 2 6600gt in sli, also i would like to know if i get a x800 and an X800 AIW, can i still run in SLI
for the past couple days norton liveupdate has not been able to update my software. i have system works 2005 and personal firewall 2005, i am running windows XP pro and .net framework1.1. i looked around on symantec's support site but found nothing, is there anything i can do short of an uninstall?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.