Hi all
I am looking for a couple of bits of info re: the Gigabyte K8NS Ultra-939 board please.
According to here:- http://www.xtremesystems.org/forums...ead.php?t=47401
under the "overvolting options" section, it states that the latest BIOS VDIMM goes up to 2.85v ?!?!
It doesnt...
Just found this - see here:- http://www.abxzone.com/forums/showthread.php?t=92828
A Venice ready bios from Asus for this board and the memory divider is faulty !!!
C'mon Asus !!!!
Ben
Hello - I hope this is OK, but a good friend of mine is having the following problem and I said I would post it here for him - he would appreciate any help he can get.
Many thanks on behalf of Alex - his problem is as follows:-
*********
Up until this morning, my PC worked %100 fine...
Hi
Am looking for a case as quiet as the Antec Sonata, but which I can buy *without* a powersupply.
Is there another brand or model case [ by any manufacturer ] that is as quiet as the Sonata but which comes *without* a powersupply ?
Beif
Hi
Am wondering which of the voltage lines +3.3v / +5v / +12v is most important to a stable / high overclock.
Reason I ask is that my rig [ A8V / 3200+939 / 1gig Corsair ] is fully P95, CPUBurn etc ... stable for over 24 hours at 9.5 x 274 @ 1.55v = 2.602gig.
Problem is...
Hi all
I cant tell from the website if the OCZ Powerstream 520 has (1) or (2) fans ?
I know it has one exhaust fan on the back, but I would like to know if it also has another exhaust fan on its bottom side pulling air up from inside the case, and then through-and-out-the-back of...
Hi all !
I *thought* my rig was now fine - specs as below:-
- A8V Rev 2.0
- 3200+ 939 @ 2.55gig @ 1.575v
- Beta BIOS 1009.004
- 2 x 512 Kingmax DDR500 @ Cas 3 @ 1:1 @ 2.8v
- 420w Topower Gold dual fan P/S
- CPU Temp at idle is 44'c in a warmish / humid room
- CPU Temp at...
Hi all
My last rig was a perfeclty working Asus P4P800 + 2.6P4 o/c to3.3 + Zaman 7000 + 2 x 512 generic Hynix D43 running in dual channel mode @ 2.75v @ 3/4/4/8 @ 1:1 @ 255mhz + WD 80gig 2mb cache disk + generic Gforce 64meg vidio card [ 2 yrs old ] + 420w Topower P/Supply - all HDD's and...
Hi all !
Narowwed my new A64 939 board down to a Asus A8V or Abit AV8.
I will be using a 90nm A64 3000+ 939 cpu - aim is to O/C as high as I can on Zalman 7000 air.
Just a couple of questions:-
=> does the Asus A8V Rev 2.0 definetly have a PCI/AGP lock ?
=> whats the story...
Hi
If there are some here using this Gigabyte K8NS Ultra 939 board, could I please ask:-
=> does it have a known / working AGP/PCI lock ?
=> what memory divider options does it offer ?
=> is there a memory compatabitity list anywhere for it ? - I plane to use two (2) of my...
Hi all !
Sorry if this has been covered before [ I did a quick search and could not find anything ], so can someone please advise:-
=> are all Socket 754 3400+ chips 0.13 *or* are there some 0.09 ?
=> if yes, how do I identify the 0.09 Socket 754 3400+ cpu's ?
=> is the CG...
Hi all
My current rig is a 2.6 @ 3.3 with a Zalman 7000 AlCu.
As I would like to get a bit more speed for some CPU intensive audio stuff I do, I am looking to get to around 3.7 / 3.8gig still on air with my Zalman 7000 & AS3 - I use a P4P-800
I *WAS* about to order a 3.2 Northwood...
See here:-
http://forum.pcvsconsole.com/viewthread.php?tid=8745&page=4
You will note from this threading conating offical Intel specs that the EO stepping Precot is pin-compatible wiht the DO stepping Prescot whcih is pin-compatible wiht the CO stepping Prescot.
Also, the "DO" is more...
Hello
Just put together a new Intel rig as follows:-
2.6C @ 3.315 @ 1.60v in BIOS gievs me 1.664v at idle in Win & 1.584 under load in Win
Zalman AlCu - A 7000
13 x 255 mhz FSB
1:1 memory @ 3/4/4/8 @ 2.75v
Hyperthreading **DISABLED**
2 x 512 Hynix D43 DDR
Asus P4P 800 BIOS 1016
All Prime...
Hi all !
I am struggling to find a definitive answer on this, so I am hoping that actual GA-K8NS users here can confirm one way or the other ...... regarding the Gigabyte GA-K8NS nForce 3 250 board:-
=> does it have a working AGP lock ?
=> does it have a working PCI lock ?
Many thanks in...
Hello
I have been offered this CPU - an AMD Athlon 64 3200+ AMA3200BEX5AR at a good price from a trusted friend.
=> I *believe* it is a mobile CPU ?
=> It is however *lidless* - ie: no HIS - is that a bad or good thing ?
=> can someone advise / confirm if this cpu will work in a...
Hello
Apart ffrom the website here:- http://www.asus.com/products/mb/socket754/k8n-e_d/overview.htm
does anyone know of any reviews for this board ?
Where one can download the manual ?
etc ....
Ususally when Asus post the detaisl on their site, the manual and release bios are out, but in...
Hi
Have decided to ignore the socket 939 scenario and go socket 754 now. I also figure that dual channel on a A64 is probably only a marginal gain [ if at all ] + the Socket 939 CPU prices are looking quite ridiculous ...
So ...... I am looking for a Socket 754 A64 board that has the...
Hello
Can people please help me figure out if I have *missed" something *OR* am I just one of the [relativley] "unlucky" ones whose 2.8MO wont go too high.
Setup is:-
- P4P800
- Latest 1016 BIOS
- 2.8 MO SL6Z5 @ 236mhz fsb @ 1:1 memory @ 3/4/4/8 = 3.3gig
- Costa Rica / Pack Date Feb...
Hello
Firstly thanks to those that responded to my socket 939 / 512cache post.
I am thinking then:-
=> are there *any currently available* socket 754 boards that have a known-working PCI/AGP lock ?
Beif
Obviously, from reviews, this Mobile 2500+ Barton is a *great* O/C chip.
=> so ...... given an Athlon 64 3400+ is a 11 [fixed multiplier] x 200mhx = 2.2gig what sort of O/C would a Moblie 2500 need to achieve in order to get the same performance as the Athlon 64 3400+ ?
=> is this...
Looking to get a 2.6C in the next few days - it will be going in my P4P800.
I am *HOPING* to run it [ long-term-stable ] at 247mhz fsb to acheive 3.2gig with the CPU voltage as close to stock as possible.
In terms of cooling, my case has a couple of good fans and I will be using the...
Hi all
Just checking to see if anyone here is using 2 x 512 sticks of A-DATA PC3200 DDR in their P4P800 in dual-channel mode ?
If so, and it is working problem-free, which particular A-DATA memory module model do you have ?
Thanks.
Benny [ BEIF ] Ifin
Hello
Looking to set up a P4P800 with 2 x 256 Winbond CH-5 modules.
I **THOUGHT** there were some issues with the CH-5 Winbond chips and the P4P800 .......
=> is anyone here running the Winbond CH-5 chips in a P4P800 ?
=> OK ?
=> any issues ?
Thanks.
Ben
Someone on the Asusboards forum beat me to the punch, but here I go anyway:-
I *HATE* Northbridge Fans - they are loud and annoying.....
For the 865PE boards - some do and some dont have Northbridge fans - what I would like to know is:-
=> has anyone here replaced their 865PE Northbridge...
Someone on the Asusboards forum beat me to the punch, but here I go anyway:-
I *HATE* Northbridge Fans - they are loud and annoying.....
For the 865PE boards - some do and some dont have Northbridge fans - what I would like to know is:-
=> has anyone here replaced their 865PE Northbridge...
Hello
For "budgetary" reasons, I need to get some Kingston ValueRam for my P4P800 ... the Asus P4P800 web page says that Kingston ValueRam *IS* tested with this board, and the module to get is the 256meg module with the Winbond W942508BH-5 chip.
Problem is that my supplier can only get the...
Hi all
=> can some please advise / explain how much of a ?noticeable-real-world-performance-difference? there would be between running the memory ratio at 5:4 ?vs? 3:2 at any given [equal] FSB in an 865PE board ?
For example, assume the (2) following scenarios:-
Option (a) is 275fsb @ 5:4 =...
This is my theory ?..
? I cant see any reason why a 2.4C P4 [ 800fsb] would **not** work in a P4B533 board.?
There, I said it ? now let me explain.
The P4B533 can do as follows:-
- 200+fsb ? we know this from all those people who ran P4-mobile cpu?s at 200+ fsb in these boards
- it is...
Hi all !
I am a dedicated Intel-man.
A good friend of mine builds & tests systems for me, and has offered me the following two setups.
I am confused as to which is the "best" way to go - with the exception of the board, ram and cpu, the systems are identical.
System 1
=> 2.4B @ 3.0gig [167...
Looking to get a BH7 and just downloaded the manual and was wondering.......
Can the AGP and PCI be locked to 66/33 independant of the CPU FSB speed ?
For example, with the BH7, is the following setting possible:-
=> 175fsb / 66.66 AGP / 33.33 PCI
Hmmmm ... please see the posts here by "Jim Bimby":-
http://www.asusboards.com/forums/showthread.php?s=f253b1b5ace93bbf2b736a0a8c0ea143&threadid=44874
I also am a P4b533 owner and also am a "regular" KingstonVALUE ram user [ never had a problem with it ] and was wondering
=> Is what this...
Looking at getting either a P4PE or P4B 533 to run a 2.4C [133] cpu and I was wondering .... can someone please advise:-
- has the P4PE "cold boot" problem been fixed yet ?
- is there a new PCB revision that fixes it ?
- is there a new bios that fixes is ?
Ben "BEIF" Ifin
- I am running some Kingston PC2700 DDR ValueRam - (1) x 512 stick.
- I am currently running at 167mhz FSB - a 2.4B @ 3006 @ 1.575v - a Costa Rica SL6RZ - %100 rock stable
- at 168fsb or higher it fails P95 *regardless* of cpu voltage or slow 2.5/3/3/7 memory timings
- boots into XP at...
For those interested, I just saw this over at the AsusBoards forum:-
http://asusboards.com/forums/showthread.php?s=523787262418966b88eace2cb64d9994&threadid=42212
Zalman have just confirmed that the new Zalman CNPS7000 Cu cooler will not fit a P4B533.
BEIF
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.