Search results

  1. T

    Acers wont post after power out

    I went to lunch and came back to the office to find my power must have flickered, as everything was reset. I have two new Acer Aspire ACA E360UD3800 desktops and they are having the same problem now. Normally when I turn them on the fan goes full throttle for one second then back to low while...
  2. T

    Connect Two Home networks

    My roommate and I each have our own network off our cable connection that offers multiple IPs. We have our reasons for doing this, and so far it works great, except if we ever want to exchange a file we have to use an external harddrive. Is there a way to connect our two Linksys WRT54GS...
  3. T

    Thanks

    Thanks for your help guys! Very appreciated, as I'm stumped but I'm going to keep researching.
  4. T

    2 NICs, outside IP address and Inside address, control

    Here's what's going on: I have 5 ip addy's with my ISP. 4 computers need their own unique Ip addresses when accessing the internet. However I'd like to remote desktop the computer over the network (using internet is slow!), so I installed an additional NIC on each computer. So now I have the...
  5. T

    Connect D-Link 624 and 2000AP, driving me nuts!

    disclaimer : I understand that D-Link does not support the 2000AP talking to anything besides another 2000AP, however I've read from many people that it will talk to the 624, even with the current firmware. This is my setup: Running D-Link DI-624 as main router with personal computers wired to...
  6. T

    Wireless Router to Wireless Router Wirelessly

    I only ask this again because seems every time someone asks a similar question, people think they are wanting to add a wireless router to their existing nonwireless router to make it wireless. I don't want that. I have a D-Link 624 router downstairs (connected to internet), and want to use my...
  7. T

    Linux DHCP-relay, anyone know of anything?

    After some researching, I found that I need a BOOTP enabled router to accomplish DHCP-relay. I found: http://www.isc.org/products/DHCP/dhcp-v2.html http://packages.debian.org/stable/net/dhcp-relay.html http://www.experts-exchange.com/Networking/Q_20698172.html Is there anyway to merge such...
  8. T

    Weird noise from speakers AND computer speaker when nothing should be happening

    Wow, this just happened, first time, five seconds then stopped. I was typing a reply to a thread over on Anandtech-Networking and my computer speaker (inside computer case of new DELL 4600 2.6ghz 800mhz 512DDR) beeped that beep when you get a error on bootup, and my speakers made the noise when...
  9. T

    Astaro won't handle Dynamic IP's from Service Provider?

    I was talking to a buddy who's setup Astaro in a similar situation as I, and said that I can not run Astaro between my internet and a switch and then assign multiple WAN dynamic IPs to my LAN internal computers. Is this true? Right now I have Cable > Switch > computers with own ip's and...
  10. T

    Power Consumption of Shuttle sv24 acting as router?

    I've been debating over router's that do ip-routing, and decided to go with the most powerful of all, a linux box. So then I decided on Astaro, as my friend has had good results. After deciding on that, I had to chose a rig. Sadly the worst computer easily available to me right now is a shuttle...
  11. T

    Power Consumption of Shuttle SV24 as Router

    I've been debating over router's that do ip-routing, and decided to go with the most powerful of all, a linux box. So then I decided on Astaro, as my friend has had good results. After deciding on that, I had to chose a rig. Sadly the worst computer easily available to me right now is a shuttle...
  12. T

    8+ port router with IP routing for cheap?!

    My ONLY requirement is to be able to assign IP address's from internet service to computers behind router. That's ONLY requirement, that and at least 8 ports. Other then that, I'm looking for 16-24 port, with security and price in mind. I know I can't find this for less then $100 but that'd be...
  13. T

    Print by IP to WinXP behind router

    Yes, I need to print from a remote IP, to a printer which is attached to a WInXP Pro computer which is behind a D-Link Router. I know it's possible, but I can't find a single article on the internet that deals with this exact problem. And no, there arn't any other reasonable options.
  14. T

    Wrote '0's to 15% of Harddisk, can I 'unerase' this mistake

    I wipe my HD pretty often (every 2 months), and was doing it the other day, writing '0's with Active Eraser (trial - no DoD), which just writes '0's once over. At 15% I realized I forgot the 'backup' stage of my process! Opps! So I cancled, and now it's just sitting there. Also, this is my...
  15. T

    Electricity : how's this work?

    I'm pretty sure this setup is *okay*, I just wanted to check it by everyone. This is all off of "one" outlet box / "two" outlets... becuase it's conveneint. keep in mind that my UPS's are only meant to keep the power on during *flickers*, which rarely happen but disturb me. They are NOT meant...
  16. T

    Memory confusing me! Quick question BIOS/Sandra/AIDA32

    I bought a few 400SC (celeron version), and then I ordered Corsair Value Select from NewEgg, the 256 3200 DDR. I know Dell 400SC brings out the true memory, and I wanted something stable. However, I pop in a chip of Corsair, and the 400SC detects it as 266mhz in the BIOS. Oh geez, 333mhz would...
  17. T

    SystemWorks2003 won't install on multiple OS's

    First off, the group of you is great, very helpful, and polite, I appreciate it. I was working on a friends computer, cleaned out everything, and set it up like this: (C:) Win98 - 8gig HD (D:) WinXP - 80gig HD I installed 98 first, and then XP. Only programs installed so far are Office...
  18. T

    How much do I charge for this job?

    I'm a mild geek, always fixed computers since I was ten, and have enevr had a problem I didn't do, although I'm definatly not the fastest. Anyways, for friends and family friends, I've always been on-call. Not intentionally, I've just always been called, and I'd always come over and help...