Thanks for the feedback everyone. I tried everything recommended here short of reinstalling Win7 with no luck so far. I can say that the stuttering is more noticeable during mouse-look movement which seems to be consistent with most other threads I've seen regarding this issue.
Someone else...
Swapped out my aging GTX260 for a shiny new Sapphire 6950 2GB yesterday and I'm about ready to swap back to old faithful. The best way I can describe it would be a lack of "interpolation" between frames. So far I've been able to confirm this issue in HL2 and Skyrim (don't have a whole lot of...
Since it's about damn time I retire my MSI 6600GT, I bit the bullet and ordered the MSI X1900XTX from ZZF...
Oh yeah and I threw in 2 Seagate 320GB SATA 7200.10 drives as well. I think I lost my mind. :D
Ok, I need some help with my K8N Neo4 Platinum BIOS version 1.A. Recently got a CACJE Opteron 146 with an AC Freezer64 Pro along with a new all-copper Vantec chipset cooler. I set the HT frequency to 4x, Memclock to 166Mhz, and FSB to 240Mhz. All stock voltages. It ran awesome like this for...
Just slapped the Vantec IceBerq NB cooler in today and it's great. Perfect fit, no cutting or disfigurement required and DEAD silent. Got it from SVC by the way, good price and fast shipping.
Remember: 99% of the time it's red pin facing power. :)
ZZF has three nearly identical OCZ 2x1GB PC3200 memory kits... all are timed at 2-3-2-5 and run at similar voltages. Could anyone enlighten me on the significant differences between these kits (ie. which overclock better, handle the most voltage, etc.)? I'd like to make a decision tonight since...
Thanks for the suggestions, which one do you recommend?: http://www.zalman.co.kr/usa/product/code_list.asp?code=014. Did either of you take temp readings before and after going passive? I would love to cut down on the noise if I can, but I want to make sure this is a good option for...
Nice overclock gsethi, which HSF are you using? My 146 should be here sometime this week and if it does anything over 2.6ghz I'll be quite satisfied for $148 :D. C'mon CACJE!
Hey, I've been running on a Neo4 Platinum for about a year so far with minimal issues. Just recently the chipset fan started getting increasingly loud and I was wondering if I should attempt to RMA it and just get a new revised board and hopefully quieter fan or just to replace it? The Vantec...
Hey Mucker, awesome speeds man. What board are you running the modules on? After seeing that the G.Skill is $133 AR (plus tax in NJ :C) I would've kicked myself for spending double on the Corsair. I just wasn't aware the G.Skill was so beastly.
$284 shipped (+possible tax) plus a $25 rebate. Probably the cheapest I've ever seen this kit. I've seen very good reviews around the net. Supposedly some of the best modules for OCing while maintaning such tight timings, plus it has fancy LEDs for you case modding folks. Rebate valid Today thru...
Ok, taking RAM out of the equation, what kind of clock speeds should I be able to achieve with the 146 on an MSI K8N Neo4 Platinum with good air (say AC Freezer 64)? I'd be stepping up from a 3000+ Winchester BTW.
My rig is at a point where it is no longer happily trucking through the latest titles at decent settings (Oblivion anyone?) and quite simply I'm a poor bastard who can't afford to move from the 939 platform or even really upgrade more than one component at once.
MSI Neo4 Platinum
Athlon64...
I'm getting some pretty nasty video corruption with my PCI-E MSI 6600GT 128MB. The corruption only seems to occur in 3D apps utilizing DirectX or OpenGL. The last thing I was playing was Battlefront 2 until my rig just suddenly powered off which I blamed on my POS hard drives until now. It seems...
Seems like every MSI board I've encountered acts the same way...
Scoobydoo, thanks for the tip that will make things alot easier.
Is there anyway to enable press key booting?
I just got my Neo4 Ultra rig together 2 days ago. I purchased it @ mwave.com for $140 shipped after a coupon :P. It has been running fine so far, with some minor quirks. My northbridge/chipset fan is running at a whopping 7300rpm and it's a bit noisy. I also noticed my northbridge/chipset temps...
I'm running Patriot PDC1G3200LLK in my NEO4. It's 512mb x 2 running dual channel at 2-3-2-5 @ 400mhz. This ram doesnt seem very good for OCing at all... I tried bumping the voltages up to 2.85v but couldn't get it to run 2-2-2-5 and after 420mhz I get lockups, athlough I'm not sure if thats the...
Just got my MSI Neo4 Ultra rig together. The chipset fan does seem a bit noisy, but then again it runs at over 7300rpm. I noticed in Nvidia nTune and MSI CoreCenter there is no reading coming up for the northbridge/chipset temperature, has anyone else had this problem?
Been thinking about going with a Nvidia 6600GT for my new Athlon64 non-SLI PCIe rig, found one for $185 which seems like a great value. Just wanted to know if there are any other cards worth considering or anything new coming out soon from either ATI or Nvidia that will compete with the 6600gt...
You can get the MSI NEO4 for a really good price with a $10 coupon at mwave.com. You might need to be a new member to use the coupon, but I'm not certain. Obviously the coupon could be used on anything you wish.
MSI K8N NEO4 Ultra @ mwave.com - $142.50 + Shipping
$10 Coupon
You need a mono 1/8" jack to rca adapter such as this one. You also need an RCA video cable or single digitlal coaxial audio cable, both seem to work.
I am using the adapter I linked to and a fancy pants gold series RCA video cable I purchased from radio shack and everything works great.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.