Search results

  1. M

    Need help overclocking Msi Neo2 with corsair valueram

    Ok I got MSI Neo2 plantinum board, cpu is NC 939 3500+, water cooled. Bios is 141, ram is corsair valueram 2 x 512. Running FSB at 210, SPD for memory is 2.5,3,3,8 1T. HTT is 4X. Now where the hell is the memory divider setting? I can't pump up the FSB any higher. What am I missing...
  2. M

    I am going through RMA request at Newegg and they suck.

    I ordered a vga silencer revision 1 for my 9700 pro, and when tighting one of the 2 studs on the back of the card, the stud snapped so I returned it for an rma. I called them up and ask them to send me the old silence model which had diffenent way to attach the cooler and is cheaper than what I...
  3. M

    Artic silencer just installed on 9700 and fan is spinning wrong way!

    Hey I just got the artic silencer 1 and the fan is spinning wrong way, the hot air is not being exhausted, what do I do? The power cable(small connector has been connected correctly to the card). Any ideas?
  4. M

    5v and 12v rails can be adjusted in Thermaltake 480 power supply

    Hey guys, I just got this power supply and the 5v and 12v rail can be adjusted with pots that are located within. Instructions can be found here and works well.
  5. M

    How do I get a thread deleted that I am the author of?

    Any help will be appreciated
  6. M

    Mods, plz delete this thread - thanks

    .
  7. M

    Anyone know for sure if 9700 pro is compatible in 3.3v agp slot

    Yeh my ti4200 died in my older system with a ABIT BH6 motherboard that is only 1x2x agp at 3.3v. I need to know if 9700 pros can run in it, I know 9600 pros can for sure but not the 9700 pro. I was gonna pick up the 9600 pro on ebay but the 9700 pros are about the same price, so I figure I...
  8. M

    Looking for ABIT ST6 raid motherboard

    If you have one thats working and not in use, let me know how much you want for and it, and let me know if modern video cards will work in the motherboard. I have a abit bh6 that I want to replace with tulatin celeron, if i can get that board, all I need is to buy a newer vid cards and I can...
  9. M

    Slipstreamed SP2 to WinXP only came out to 302 megs?

    Hey guys, I did it twice and both times it came out to 302m total. When I slipstreamed SP1a it was almost 500m and SP2 RC1 was 600m. It cant be right to be only 302m can it. I burned it to make it bootable and both times, when I tested it to see if it will boot up, it gives me the NTLDR not...
  10. M

    Extreme Water cooling - tell me what u think

    Ok, I want to get into water cooling in the next couple of months when I put together a new rig, so here is an idea I came up with. My computer rarely moves from the spot its in and I hate running to the refrig for drinks all the time. So I am thinking of buying one of those small refrigerators...
  11. M

    Epox 8KDA3+ NF3250 GB mother board

    Check this LINK out.
  12. M

    Need info on replacing MOBO without having to reload everything

    Ok, I don't know if it's possible to replace motherboard without having to reload everything on my mainsystem. My main system is on a Abit BH6 intel motherboard and I like to replace it with a Epox 8k3a+ amd motherboard. All my stuff is loaded on a 40 gig hardrive running original Win 98 working...
  13. M

    Newegg.com ripped me off for $186!

    I had a RMA for a motherboard and a stick of mushkin ram. The dam Epox motherboard kept giving me a C1 post error, which is something about the memory stots or the ram itself. So I send the motherboard back with the memory wrapped up in bubble wrap. Guess what, some moron apparently chuck out...
  14. M

    Transition from Abit BH6 to ST6 Raid-need some help

    I have my main system on the Abit BH6, version 1.0, with a sloket running a celeron 566 overclocked to 856. My video card is the Leadtek Geforce2 MX. Now everything has been running solid and I have lots of programs that I have downloaded over 2 yrs that I use. This board has been very good but...
  15. M

    Anyone know the max. voltage of fan headers on Abit KT7 Raid?

    If someone knows anything about the electrical specs of the fan headers on the Abit KT7 Raid, please reply. I just don't want to burn out any of the 4 fan headers like I have done before to by Abit BH6 board.
  16. M

    Help with Win98 Wordpad program error message and the printscreen key

    I get this error message when I try to run wordpad.exe for Win98- Microsoft visual C++ runtime library runtime error! Program:C:\Program files\assessories\wordpad.exe abnormal program termination Now I have already tried uninstalling it and resinstalling, no change. Also...