Search results

  1. B

    nForce4 Users & AMD Cool 'N' Quiet

    Board: DFI nF4 Ultra-D unified nForce driver: 6.39 OS: 32 bit WinXP Cool 'n Quiet is working for me. At least the PowerNow! Dashboard says it is cutting back the voltage and CPU speed. What do I need to do to have it control my fans?
  2. B

    Switched to a SuperLanBoy Case, now the extra USB ports on my K8N Neo don't work **USB Ports Fixed Temporarily**

    Got my replacement USB port today. Plopped it in and my problems are gone. Way to go Antec (and Philgag)!
  3. B

    DFI nF4 Ultra-D & Kingston RAM problems

    It won't be slow at all. I am not overclocking my machine, but I had a hard time getting it to work (ie install Windows or pass Memtest86) without manually adjusting the bios. The problem seems to be that the ram reports to the motherboard what "timings" to default to. For whatever reason...
  4. B

    Switched to a SuperLanBoy Case, now the extra USB ports on my K8N Neo don't work **USB Ports Fixed Temporarily**

    I was getting something similar to that "sometimes" on my last mobo (haven't seen it on my new one). I got this message on both mobos: "USB Device Not Recognized. One of the USB Devices attached to this computer has malfunctioned, and Windows does not recognize it." I would see this on...
  5. B

    Switched to a SuperLanBoy Case, now the extra USB ports on my K8N Neo don't work **USB Ports Fixed Temporarily**

    Found that support page: http://209.172.124.66./TechSupport/FAQ1.asp Sent an email to support. I'll report back.
  6. B

    Switched to a SuperLanBoy Case, now the extra USB ports on my K8N Neo don't work **USB Ports Fixed Temporarily**

    Do you have a link to this? I can't find anything about replacemnt USB ports on their support site. I may just try emailing if this is a known problem. Greg
  7. B

    Switched to a SuperLanBoy Case, now the extra USB ports on my K8N Neo don't work **USB Ports Fixed Temporarily**

    I meant a standard for the USB header. But I feel your pain.
  8. B

    Switched to a SuperLanBoy Case, now the extra USB ports on my K8N Neo don't work **USB Ports Fixed Temporarily**

    Just double checked and I don't have the extra gound wire connected. Is there no standard for these headers that they must be loose wires like that? Annoying.
  9. B

    Switched to a SuperLanBoy Case, now the extra USB ports on my K8N Neo don't work **USB Ports Fixed Temporarily**

    I have the original Lanboy case. I've never had any luck with the pesky front USB ports with my last mobo (MSI KN7N2). I just got a new mobo (DFI NF4 Ultra) and moved everything into this case again, and still my problem persists. I can plug a USB mouse into those ports and it works...
  10. B

    DFI nF4 Ultra-D & Kingston RAM problems

    Kingston's web site shows timings for this ram to be "2-3-2-6" (CAS/tRCD/tRCP/tRAS) (Still trying to learn the lingo) http://www.ec.kingston.com/ecom/configu.../partsinfo.asp?ktcpartno=KHX3200AK2/1G So why does CPU-Z say something different? Why do they only advertise one set of...
  11. B

    DFI nF4 Ultra-D & Kingston RAM problems

    When I run CPU-Z, my RAM (Kingston KHX3200AK2/1G) reports SPD Timings Table of: Freq 166MHZ/200MHZ CAS Latency 2.0/2.5 RAStoCAS 3/3 RAS Pre 3/3 Tras 7/8 But I get memory errors in Memtest86 test #5 if I keep everything set to auto by SPD. Board appears to run fine if I manually force...
  12. B

    A8N-SLI BIOS 1004 and Cool and Quiet

    Just setup Cool N Quiet tonight on my DFI NF4 Ultra. The walkthrough I found said to change the Power Options profile, but it also mentioned installing a driver from AMD's site. "AMD Athlon? 64 Processor Driver for Windows XP, Version (exe) 1.1.0.18"...
  13. B

    **IMPORTANT UPDATE** Attn: All DFI Ultra-D Motherboard owners!!

    I also had no problems from ZZF. But I do recall reading about others having damaged boards due to shipping. Might be onto something. Greg
  14. B

    DFI NF4 Ultra work with Corsair Value Select?

    Just wanted to report back that I flashed my bios to 2.09 (is this a beta?) and all my memory issues seemed to be resolved. I put the MaxAsync Latency back to auto and all seems fine now. Here is the bios I used: http://oskarwu.myweb.hinet.net/dfi/betabios/N24LD209.rar found in this...
  15. B

    XP x64 RC2 on MSDN?

    I just realized that link maybe for RC1. <smile> Well at least there is hope the RC2 will work with my board. Greg
  16. B

    XP x64 RC2 on MSDN?

    Actually you don't have to be MSDN subscriber for RC2. http://www.microsoft.com/windowsxp/64bit/evaluation/upgrade.mspx Just fill out the form and you can download it immediately. No purchase of CD required. I've downloaded and got my key. Just cannot get it to install on my new DFI...
  17. B

    DFI NF4 Ultra work with Corsair Value Select?

    Well I changed my Max Async Latency setting to 7ns and voila! My Kingston KHX3200AK2/1G passed Memtest86 for the first time. Running Windows right now with it. TJmoney, you have made my day! Greg
  18. B

    DFI NF4 Ultra work with Corsair Value Select?

    I just got this board last night. I have finally determined my instablility is due to my RAM (couldn't even install windows using it). I have $300 worth of Kingston KHX3200AK2/1G and it won't work. This ram works fine in other boards. I tested both sticks with a hardware memory tester today...