Search results

  1. S

    Workgroup problems

    I have three machines, two running XP HOME and one running OS X Leopard. All are members of the same WORKGROUP. Network setup was run on both XP boxes and are configured with File/Print sharing on. However, when I go to workgroup computers on rig A it doesn't even see itself in a workgroup...
  2. S

    Internet connection turns on PC

    Whenver I turn off my computer my ethernet connection seems to turn it back on. I don't have this problem if I put my computer in standby mode, only if I hibernate or turn it off. I had this problem before and managed to fin some setting in XP that solved it, but since then my HDD has crashed...
  3. S

    No power up

    So, last night I put my rig in lower power standby and today when I come in to wake it up I notice the power LED blinking on and off. I push the power button to wake up the rig and nothing happens. I don't have any signs of power other than the power LED under the power switch. Did my PSU die or...
  4. S

    POST problem

    When I turn on my computer I get a beep, the post screen comes up, it lists my CPU and then nothing happens. However, if I shut it down and then turn it back on everything is fine. Any ideas? Specs: Athlon FX-55 K8N Neo4 Platinum/SLI 1GB Corsair TwinX PC3200XL Pro BFG GeForce 6800...
  5. S

    K8N Neo4 Platinum/SLI

    I posted this over in the Motherboard forum but no one has responded. This is my second MB of this make and model and I now have the same problem I did with the old one. I have my DSL connected to the Marvel LAN port and whenever it recieves a ping from the DSL modem it boots the computer...
  6. S

    K8N Neo4 Platinum/SLI

    Alrighty, I'm getting pretty frustrated, so any help would be appreciated. This is my second MB of this make and model and I now have the same problem I did with the old one. I have my DSL connected to the Marvel LAN port and whenever it recieves a ping from the DSL modem it boots the...
  7. S

    XP+Norton 2005 Activation=BAD

    OKay guys, I'm about at my wits end and just don't know what else to do. My new rig worked perfectly (see description below), I came home Friday, turned it on, was looking at my email, and then I got norton pops up and says I need to activate it. I had already done this but proceeded to go...
  8. S

    memory error while running memTest

    I get the following error: "Error found with word pair# 11699074, values 3355098174, 3353001022 do not match." Could sombody tell me what that means? Thanks in advance.
  9. S

    FX-55 temps

    I've finally got my new system up and running with the followig components: AMD FX-55 MSI K8N Neo4/SLI Platinum 1 GB Corsair TwinX 1024-3200 XLPRO BFG GeForce 6800 Ultra OC Zalman 7000b-Cu PCP&C 510 SLI Lian-Li v1000b WD 76GB Raptor x2 My current temp at idle is 39C an my under full...
  10. S

    PC P&C 510 SLI

    I have a Lian Li 1000B and I was wondering if there is any form of venting on the bottom of the 510 SLI. The Lian li has a lower vent for cooling the PSU but very little room behind the PSU for air flow.
  11. S

    It WORKS!!!............Well, it DID work.

    Okay, so I just finished putting my new system together: FX 55 Zalman 7000B 1GB Corsiar XMS BFG 6800 Ultra OC WD 74 GB Raptor x2 TDK DVD RAM FDD Lian Li 1000B Enermax Noisetaker 600w I turned it on, it POSTs fine. I set the clock in the BIOS. I save and exit bios. Reboot. Get...
  12. S

    MSI K8N Neo4 Platinum

    I posted this in the official thread but thought I would also post it out here for any that might know: Alrighty, maybe i'm a moron, but I have a Zalman 7000B-Cu and to install it I have to change the back plate, so I go to change it and the MSI one won't come off. I have unscrewed both...
  13. S

    BFG 6800 Ultra

    While trying to pick a solid and (hopefully) quiet power supply for use with two of these cards I found that I didn't know the amps these cards pull. Anybody? Thanks in advance.
  14. S

    looking for a solid & quiet psu

    With all the concerns over dual rail psu's I've reconsidered my preference for an Enermax Noisetaker 2.0 SLI and was wondering how the above psu compares in terms of noise/stability. I will be running an FX-55 rig with dual BFG 6800 Ultra's in a Lian-Li v1000B case. Thanks in advance.
  15. S

    Lian Li V1000

    Anybody with one of these know the dimensions of the psu area? Conversely, does anybody have this case with an Enermax NoiseTaker v2 600w in it and does it fit? Thanks in advance.
  16. S

    Building new Fx55 rig

    It's been about forever since I built my current rig and I am looking to go fairly top of the line with my new one. I'm thinking about going with the following components, any input would be appreciated. Oh, and I'm probably not going to do any major OC'ing in this rig. AMD FX-55 ASUS...
  17. S

    Zalman HS

    I'm thinking of getting a Zalman 7000B for my FX-55 and I was wondering which cooled better the Cu or AlCu? Thanks in advance.
  18. S

    Lian Li V1000 vs. V1200

    I've been to the Lian Li website either I'm blind or they don't really have difference in their specs. Anybody know the difference between these two?
  19. S

    Lian-Li PC-V1000 & ASUS A8N-SLI

    I've heard that the cables from the front connections in this case don't always reach their spot on the motherboard. Does anybody have this setup and what have you found out? Thanks in advance.
  20. S

    Ram speed vs. Mobo

    I've got an old Abit KR7A Raid Mobo (AMD 2000+ chip) with 512 Mb of 266 Mhz DDR. I'm in the process of spec'ing out a new rig and I was looking at the Corsair TwinX1024-3200XL Pro for it. Now this memory is DDR400 of course and my mobo only supports up to 266, so my question is this: Can I go...