Search results

  1. W

    Intake or outake fan?

    you could make a filter for the fan if you are worried about dust, any material with small pores should do, search online fo options. You will still need to clean this out every copuple weeks or so. Your choice, cleana filter or you system :)
  2. W

    Anyone go lucky with a recent purchase of Winnie 3000+

    bought mine from Newegg in January, stable at 2.7GHz (270x10), love the damn hting its sick :)
  3. W

    Issues with my ATI X800 XL video card

    dump the catalyst control center, ie: uninstall it from your add remove programs control panel.
  4. W

    Issues with my ATI X800 XL video card

    Sweet, glad it worked man. Heh you'd figure with a basically brand new card they'd have sent new drivers that work with our MBs. Man I keep having issues with nvidia so I switch to ATI then I have issues with them and switch back....heh its a constant struggle :)
  5. W

    Issues with my ATI X800 XL video card

    Any luck?
  6. W

    Issues with my ATI X800 XL video card

    I had similar problems, fed up everything, I found that the catalyst center was the issue after uninstalling that, and upgrading the driver only to 5.3 everything is smooth with my Nforce4 Ultra setup.
  7. W

    X800XL Question for all new owners

    No worry about straying vcore=1.425 Idle 29C Load 36C Prolly will go up a bit once winter is gone, my apt is at 64F currently and I keep it around 70F durring the summer.
  8. W

    X800XL Question for all new owners

    Heh, seriously we must read the same reviews except for the case ;)
  9. W

    X800XL Question for all new owners

    Hey guys finally got my X800XL from ATI yesterday. Its running great but a few questions. 1. Does yours show up as 2 devices under device manager? (I see X800 and X800 secondary) 2. Can you publish 3dmark data? Mine show as unpublishable. Thanks all.
  10. W

    K8N Neo4 Ultra, Audigy2 Issue??!

    No luck, seemed to work, but crashed durring stability check and 3dmark 05(much harder on my sys than 01/03). I removed drivers, took the card out, reactivated the ac97 and everything is normal again. :( I am so sad, this blows, audio is so average with the onboard and I lose 200MHz if...
  11. W

    K8N Neo4 Ultra, Audigy2 Issue??!

    cool I will try this tonight see if I can get abck up to my max OC, thx man
  12. W

    K8N Neo4 Ultra, Audigy2 Issue??!

    Hey all had my system running great, 270x10 HTT4x Ram 1:1, benched fine, stress tested 72hours no reboots, seemed perfect. Yesterday I decided to install an Audigy2 I got as the built in sound seemed twangy and subpar. Upon reboot seemed normal, then itunes caused a freeze with visualization...
  13. W

    What Monitor SW for NF4 (Specifically MSI Neo4 Plat)

    Hey man for the Lock alert I got that too thinking I had it locked in the bios. Go into your Bios and check that you have all the Bus/CPU features on disabled not on spread spectrum as this will auto overclock all components based on HTT speed. I have used corecell, ntune, and fanspeed all...
  14. W

    ATTN All A64 Owners

    3200+ 90nm duh fergot speed: 270x10=2.7GHz Idle=30C Load=39C Stock HSF Load goes up to 41C if I OC my vid card, guess it adds heat to the system
  15. W

    I love my K8N Neo4 Platium, uh...thread? heh

    Just thought I'd share my love of this board and my 3200 winnie with you all. Stable at 270x10 CPU, 540MHz memory at 3-4-4-8 1T, and 270x4HTT. I only had to boost CPU v to 1.45 from stock. My idle is 29C and my load is 39C(41C if my vid card is OCed).
  16. W

    Think I found close to my best performance for my K8N Neo4

    Hey all been tinkering with my board fer a while now. Was ablt to drop my HTT to 3 x and do 300MHz, got my CPU to 2.7GHz, and plus got my ram all the way to 600MHz at really loose settings but still with 1T. I saw a boost over my original Oclock at 220x10 and ram at tight timings, but it...
  17. W

    MSI nForce4 Neo4 "Ultra" owners - what ram are you using?

    2x512 Pdpsys Patriot 3200+XBL CAS2 ram (TCCD) runnig currently at 500MHz with 2.5-3-3-7 1T(1.7v) Max I have been able to run so far is 600MHZ 3-3-3-8 1T (1.8v)
  18. W

    MSI K8N Neo4 Ultra Northbridge Fan

    Mine is similar, as are ASUS and others, runs 6000-7000 low load, up to 8000+ under high load.
  19. W

    New Nvidia drivers and NCQ?

    Hey I have NCQ enabled on my Neo4 with seagate 7200.8 drive. So far no problems at normal settings, the only issue I had was during a software overclock(nvtune) of the PCIE bus my HD was corrupted. This occurred at well beyond spec for the bus.
  20. W

    MSI K8N Neo4 nForce4 Ultra

    Hey all so how are your gaming/3dmark scores with Overclocks? At 220x10, HTT 5x, 440mhz mem I boosted my scores heavily in all 3 3dmarks(17k-->21K in 01). When I OC to 295x9, HTT 3x, mem 500Mhz I only gain avery small margin and gaming doesnt seem any faster. My bandwidth goes way up...
  21. W

    *** Official MSI K8N Neo4 Platinum (nForce4 Ultra chipset) Thread ***

    stupid quick reply heh, I have my sys running stable at 220x10 1:1 memory Heres a question for you all, I was able to clock my CPU all the way up to 2.7GHz stable, ferget exact number but HTT was around 300x3. I re-ran benchies from my 220x10 setup and the higher CPU only gets me like 200...
  22. W

    MSI K8N Neo4 Memory Issue Help appreciated.

    Also, heres a question some of you heavy ocers can help me with If I am set at 220HTT 1:1 Memory 10x multi vs. 300HTT lower mem divider(think it was 150) and 9xmulti, so my CPU is 2.2 --2.7 but my 3dmark results are all within 4% why should I use the Higher frequency/HTT ??????? Thanks
  23. W

    MSI K8N Neo4 Memory Issue Help appreciated.

    Yeah thats what I figured out, manual isnt very good if you havent used MSI dual channel before
  24. W

    MSI K8N Neo4 Memory Issue Help appreciated.

    Also in terms of HTT and OCing I was able to get my memory up to 600MHz with the green/purple setup (3-3-3-8 1T) I was able to get my CPU to 2.7(9x300) and run stable(memory at 460~) And fastest HTT I got stable was 303 without adding any voltage or changing the 16x16 settings.
  25. W

    MSI K8N Neo4 Memory Issue Help appreciated.

    Hey all setup my rig and been fooling with OCing One strange thing, the book says to use green slots first, so I tried and it sets my mem to 167MHz and Sandra shows 1x1 =64bit memory at 2,4GB/s When I switch to one green/one purple, I get 1x2 =128bit and 5GB/s I assume this second...
  26. W

    MSI K8N Neo4 nForce4 Ultra

    Hey all got mine running with slight OC so far(havent had time for max) 3200 at 220x10 stock cooling Pdpsys ram at 440 2-3-3-6 1T x700pro stock Lian Li PC60 Runs prime stable overnight 3dmark01 21K (was 17K at stock speeds) 3dmark03 8K 3dmark05 3K I am gonna try and max it...
  27. W

    Nforce4 North Bridge Fans, whats the Load speed for yours?

    Hey all finally got my NEO4 K8N up and running. Low and behold my NB fan alarm went off under 3dmark near then end of benching. The alarm was set at 6200rpm and my fan was running 8000 rpm, is this normal for Nforce4 NB coolers? I mean damn, heh hope mine isnt f'ed up.
  28. W

    Did u see the review of the DFI board on Anandtech??!!

    Hey I see you have an x-connect, Igot an OCZ modstream, do you have any problems with getting your cords bent and run through the system? I know abotu the DFI, man I wish I ahd waited for the Ultra instead of the MSI I got, it rocks but this kicks ass
  29. W

    MSI K8N Neo4 nForce4 Ultra

    Hey all got my setup put together last night K8N Neo4 3200 90nm 2x512 Patriot 2x2x2x5 3200ram 200GB Seagate NCQ drive x700 Pro netgear 54g I am waiting on a new copy of winxp to do full check, but it posted fine and recognized all my drives and cards. I will let you guys know...