Search results

  1. D

    Initializing disk after raid 0 failure

    well I have the drive back up and running. I deleted the array without deleting the information. Then I created a new array without a quick initialize. booted up on another disk and I am copying the info on it to a new disk. No more raid 0 for me. raid 1 at minimum. scandisk checked...
  2. D

    Initializing disk after raid 0 failure

    I came downstairs last night to see that my computer was scanning for disks at the post screen. I found out that I had a disk fall out of my array. after searching the net I found that I could reinitialize the array but only if the drives were not toast. I am now on the computer with the...
  3. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    my saphire 9800se worked fine on my board
  4. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    htt 275 ldt 600 mem 100 vcore 1.55
  5. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    Lydi, I set it back to stock and I still cannot change the timings.
  6. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    Lydi: kingstong hyper-x ddr333 run at 2-2-2-5 but chaning in the bios get me know where. they will only run 2-4-4-9. I can change them in a64tweaker and that worls but after a reboot they go back to 2-4-4-9 X2C: i have two maxtor drives in a sata raid. How did you get your OC ??
  7. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    lydi, can you please let me know what is going on with my mem timings? they change in the bios but when windows boots they are always the same. I can use a64 tweaker to change them but then it changes back after reboot.
  8. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    anyone know what the issue is with the timing on the mobo?
  9. D

    2 + 2 = 5 for extremely large values of 2.

    My prof did the same thing discrete math is weird. my wife got her degree in math and I swear her 500 level courses they were just making sh1t up as they went.
  10. D

    2 + 2 = 5 for extremely large values of 2.

    anyone know what: 1/9 is? 2/9? 3/9? 5/9? 7/9? so what does 9/9 equal?
  11. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    Not sure if anyone else has this issue but I have 2x512 kingston hyper-x ddr333 the timings on these sticks id 2-2-2-5 so I have set it this way in the bios but when I boot into winxp and run cpu-z 1.2x it says 2-4-4-9 I can adjust them with a64 tweaker and then it registers correctly but after...
  12. D

    Monarch vs. ZipZoomFly

    I've ordered from zipzoom for years and have never had an issue even when cross shipping items and such I highly recomend them to anyone as for Newegg there prices have recently been higher than zzf but I always play the two of each other.
  13. D

    linux suggestion for old hardware?

    depends on what level luser are you? Mandrake is easy to install. if they are just looking for web/mail/word then any distro is fine. try Ubuntu.
  14. D

    WinXP Pro vs. MCE

    OEM doesn't mean they don't sell it :) the MCE that newegg sells is OEM, Captain
  15. D

    SLI board with an ATI card

    Ribbon: exactly :) I'm hoping a mod will see this.
  16. D

    Dual Factory Watercooled Gainward SLI 6800

    dual 512mb ultras and you concerned about overclocking? hehe thats too funny
  17. D

    SLI board with an ATI card

    bump
  18. D

    Help narrow down 17'' lcd choice

    LG 1720p I have one it is awesome and bestbuy has a great deal on one this week
  19. D

    SLI board with an ATI card

    see he started the damn post and never replies again
  20. D

    SLI board with an ATI card

    http://www.msicomputer.com/product/p_spec.asp?model=RS480M2-IL&class=mb actually ati makes the chipset too. but the different chipsets afaik arent optimized to only use a gpu from that manufacturer also but who knows what the future will bring.
  21. D

    SLI board with an ATI card

    he starts the thread replies to it once then starts a new thread on the same topic. it's annoying I already told him to stop a few weeks ago. He probally won't respond and in a week he'll say "anyone have an opinion on the new asus board?" He says he is tied to ATI in one of his previous...
  22. D

    SLI board with an ATI card

    Legolas: You really ned to stop triple posting these issues re-open your old ones. You asked a week or so ago about ordering you ati card now you want sli do the research before you buy something. http://forums.anandtech.com/messageview...atid=27&threadid=1539647&enterthread=y...
  23. D

    SLI board with an ATI card

    I wouldn't be biased towards Asus there are plenty of great companies out there. Check out the Soltek sl-k890-939 I have the agp version its a great board stable as stock with a huge overclock.
  24. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    Yes it is normal, I'm running 36 idle 50 under load
  25. D

    sending computers to Iraq

    thanks
  26. D

    sending computers to Iraq

    I'm sending a computer to a troop in Iraq and I have his APO addy does anyone know if the usps has different rates for packages to the troops?
  27. D

    should i even bother

    wait for dual core
  28. D

    winchester 3000+ @ 2.7 on air

    nice OC 3000's oc just as well as the 3500's for some reason. seems funny. I don't think your mem has much to do with it. I have a 7700-cu running at 2.75 the 2.7 range seems to be as high as you can't get them unless you go with a phase change system.
  29. D

    Is it worth to upgrade p4 3.2 to amd 64 3500

    your better of sticking woth the intel setup for now and waiting until the next gen of proc's. hopefully dual cores. I just bought a second machine I have the same setup you have along with this one and the difference is hardly noticible. it may benchmark slower but in reality there is no...
  30. D

    Max FSB on NF7-S REV2.0

    search?
  31. D

    Water cooling kits

    I've been thinking about getting a wwater cooling setup but not sure if its needed I can get this pig to post after 285 but havent put it any higher I run at 275 stable as all hell and idle 38 load 50 would water cooling get this temp down and maybe allow me to push the chip higher?
  32. D

    Best wireless/wired router for 100mb internet

    100mb is damn fast adn would never get as slow as a 1.5 dsl when going out of country. Have you ever been to a site no maintained in the us? by your statement it should run like a 56k modem.
  33. D

    New Winchester Issue - Won't post past 219 FSB on MSI Neo 4 - possibly others

    and where does it sy how far you can oc it? 10% overstock would be an overclock correct? it is not defective as running your mob/cpu out of spec voids the warranty. IT IS NOT DEFECTIVE IT IT RUNS AT THE RATED SPEED GET IT THROUGH YOUR THICK SKULL
  34. D

    New Winchester Issue - Won't post past 219 FSB on MSI Neo 4 - possibly others

    Heeinrich: You seem to take issue with people criticizong your thread when you post into a public forum people are allowed to express there opinion. To rma a board that works as described so you can sell it as new on ebay or wherever is wrong and fraud.
  35. D

    An announcement for the SL-K8TPro-939 review by Mr. Fink

    all issues with this board as far as I know are fixed. Lydi rox and soltek is awesome I don't think Asus will get me back after Soltek's great customer service. Also this board screams!!!!
  36. D

    Handheld PCs

    I have an x30 with wm2003 se and my wife has a dell x5 with wm2003 we both love them she complains because now we have a total of seven pc's including ppc's in our house :D
  37. D

    Windows Media Center Edition 2005

    I'm using it now and I love it. I don't currently have it running on my hdtv but it is a normal win xp with extra features so it runs all the same software.
  38. D

    desktop routers v. consumer routers

    what are you doing that people are trying to hack into your home network? seems like your going a little overboard