Search results

  1. G

    Corrupt \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Well I got the message on my other computer. It says to put in the windows xp cd and press r which I do. I then have to choose the installation I want to repair. The only choice is 1 so I press 1 and enter. It then gives me a BSOD with a registry error. I'm not sure what I'm doing wrong.
  2. G

    Neo 2 Platinum and 3dmark05

    Well I've come across an interesting issue with my Neo2 and 3dmark05. I've looked through orb and it seems to affect other neo2 owners as well. If you wanna look at the thread on the futuremark forums it's here. http://discuss.futuremark.com/forum/sho...page=0&view=collapsed&sb=5&o=0&fpart=1...
  3. G

    6600GT troubles

    Well my 6600GT is having some troubles. At first I was having a problem running 3dmark. When I started 3dmark05 instead of going to my oc core it goes to only 500. Sometimes it worked with my real oc clock but usually it went to the low power 3d setting. Well I got control of my low power 3d...
  4. G

    Wrong temps?

    Well I'm currently running my cpu at 240x10 at 1.44vcore. Speedfan used to show my idle around 30 and my load while playing CS never went above 48. Now it shows my idle at around 40 and my temps while playing CS reached 56! Sandra also shows about a 40C idle as does BIOS. I'm not sure what...
  5. G

    Bad CPU? Bad Ram? Bad MB?

    Well I'm not sure what is up. Right now I'm running at 240HTT with a 10multiplier at 1.5vcore with memory at a 6:5 divider(200mhz) at 2-2-2-6 timings at 2.6vdimm. It runs everything fine and ran prime for over 6 hours. Well I'm trying to get mym memory 1:1. I put on timings of 2.5-3-3-7 at...
  6. G

    Narrowing sources of instability

    What the best way to narrow source of instability in an overclock. I'm trying to get to 2400mhz on my 3200 with my ram at 1:1. I try various voltages for vcore and vdimm and it keeps failing the blend test in prime. My memory timings are at 2.5-3-3-10 which I think should easily pass. It did 33...
  7. G

    Problems with overclock

    Well now I really don't know what's going on. Currently my cpu is at 230 HTT x 10 at 1.45 vcore with the memory at 230 2.5-3-3-7 at 2.6vdimm and it crashes from CS:S. It took longer to crash than when I had 250HTT but it still did. I know my memory can run those timings(its TCCD and can run...
  8. G

    Winchester OC problems

    Well I ran prime95 with my cpu at 250mhzx10, my ram at 125 mhz, and my htt multiplier at 3x. My vcore was at about 1.616 and yet prime95 still failed. It also fails super pi. I'm not sure what else I should change
  9. G

    New pc overclocking help

    Well I just recieved all the parts for my new pc. It is what is described in my sig. I've read most of the stuff about overclocking but I'm still sorta confused. Do I just raise the HTT mhz until the system won't boot or crashes? Once it crashes what do I raise? The DDR voltage/timings? The...