Search results

  1. 0

    Dumb Question: How/Where does one mount a fan on this HS?

    http://www.techniz.co.uk/modules.php?name=Reviews&rop=showcontent&id=132&page=6 http://www.techniz.co.uk/modules.php?name=Reviews&rop=showcontent&id=132&page=7 Those should do it. :)
  2. 0

    Anything wrong with this PSU?

    :thumbsup: That would be my pick aswell :)
  3. 0

    Anything wrong with this PSU?

    Have a look for yourself
  4. 0

    MOTHER OF ALL POLLS- How Much Ram to you have? How fast is your CPU? Are you a Dial Up user? NEW OS Poll Added

    2048MB 2.2GHz Athlon XP Cable AMD Athlon 64 Windows XP Pro Domino's Mc Donald's
  5. 0

    Can water be flushed directly on the CPU??

    Link Scroll down to the 5th post, jaydee has posted some pics of a Direct Die Cooler.
  6. 0

    can't choose between psus

    I didn't actually read through it, but I know what you mean. I have an Antec TB480 and the fans on the fan only connectors defintely spin faster than the psu fan.
  7. 0

    can't choose between psus

    http://www.antec.com/us/support_faqs.php?FAQno=13
  8. 0

    I'm flirting with buying a PC_Power and cooling deal

    Of course I knew that the modular connectors aren't the only variable in these test, afterall, the modstream isn't just a modular powerstream... I was of course working under the assumption that both were high quality psu's, and both should have had no problem keeping voltage close to spec...
  9. 0

    I'm flirting with buying a PC_Power and cooling deal

    Oh, you're right... it was 620W, my bad. You call that holding up well. :confused: I've seen Antec PSU's run 150W over spec and still keep rails FAR tighter than that.
  10. 0

    Which PSU??

    :thumbsup:
  11. 0

    I'm flirting with buying a PC_Power and cooling deal

    Correct, while the modular connections would have contributed to those numbers, it's not clear exactly how much unless measurements are taken before the modular connector and at the other end of the wire.
  12. 0

    I'm flirting with buying a PC_Power and cooling deal

    You're right... the voltage drop along 2 feet of wire is so small it couldn't possibly make a difference could it. :disgust: So lets have a look: OCZ Modstream 520 Zero Load: 11.44 Test One (367W): 11.94 Test Two (302W): 12.46 Test Three (430W): 11.64 Full Load (520W): 12.28...
  13. 0

    I'm flirting with buying a PC_Power and cooling deal

    http://www.pcpowercooling.com/technology/myths/
  14. 0

    best power supply?

    13 PSU Group Test at Overclockers Australia and warning about SkyHawk PSU
  15. 0

    Passive low profile NB cooler?

    No problem :) I'm not sure how well that CM heatsink would work if it's only cooled passively, but at 2cm, you're pretty limited on what you can use. :( If the one Mant linked to is quiet, then I'd say go for that. Apart from that you could always watercool it, although that would be...
  16. 0

    Passive low profile NB cooler?

    One of these without the fan is 13mm tall, so that should fit fine.
  17. 0

    Passive low profile NB cooler?

    A Thermalright NB cooler may fit, it's not as tall as the zalman. NB-1 NB-1C Edit: Actually were you looking at this NB cooler? If so Zalman have a shorter passive NB cooler.
  18. 0

    what is the most popular PSU around?

    At the moment, I'd have to say Seasonic. At least until Antec fixes the problems with the fan in the TP2.0. Link
  19. 0

    Lindsay Lohan eats herself!

    fixed :o
  20. 0

    Lindsay Lohan eats herself!

    mwtgg has the link up
  21. 0

    Where do QFTs go?

    QFT
  22. 0

    Best Case Ever Made

    I just checked that one out, that is a very nice case indeed. :) Link
  23. 0

    Best Case Ever Made

    Antec P160 Pic 1 Pic 2 It's one of the nicest looking cases I've ever seen, the dual 120mm fans are a plus too. :thumbsup:
  24. 0

    Improvised Thermal Compound

    Peanut Butter works well :)
  25. 0

    ***New*** Antec TX Case

    On the Antec site it says that there are "2 front (optional) 80mm fans" Link The reason I knew it was at the front of the cage is that I recently built a computer using the PlusView1000AMG which also had two front 80mm fans, one of those being at the front of the hdd cage.
  26. 0

    How to volt mod TT Tsunami fans??

    no problem :)
  27. 0

    How to volt mod TT Tsunami fans??

    That wiring is normal, this mod should still work fine.
  28. 0

    How to volt mod TT Tsunami fans??

    They're wired differently from this? Edited: better pic
  29. 0

    Seasonic or OCZ

  30. 0

    ***New*** Antec TX Case

    There's an 80mm fan at the front of the cage. :Q
  31. 0

    Modstream 520W vs TruePower II 550W

    Which would actually be zero...
  32. 0

    Aspire AS-500W

    That'll do it. :thumbsup:
  33. 0

    Anybody know who owns Jamster?

    http://www.justramit.co.uk/justramit-272.htm This guy hits the nail on the head.
  34. 0

    Anybody know who owns Jamster?

    If you find the owner, push one into the other eye socket for me aswell. :|
  35. 0

    red eye... whats that movie about?

    He has teh red eye. :Q
  36. 0

    Just wanted to say Hello!

    Can I come?