Search results

  1. A

    Lian Li PC-7FN

    One more question... Can the case hold 38mm fans (instead of the standard 25mm) in the front, rear, or top? -Thanks
  2. A

    Lian Li PC-7FN

    I am also looking to get the PC-9F, but I have two questions. Can one or both of the front 120mm fans be swapped out for 140mm ones? If someone would be using two optical drives in the top 2 bays and a card reader in the one below that... could they still mought a single HDD without using the...
  3. A

    Samsung F3/WD Black... also quick RAID0 question

    Greetings, I am looking for a new 1TB hard drive (not a SSD at this time). I have been doing a little research and came to the conclusion that the Samsung F3 and the Western Digital Black are probably the two fastest 7200 RPM drives right now. I was looking at this Samsung F3 drive on Newegg...
  4. A

    quick question regarding Hybrid SLI...

    Are you saying it can be done... or are you saying that you don't know?
  5. A

    quick question regarding Hybrid SLI...

    My M2N32-SLI Deluxe Wireless Edition motherboard died (it was under warranty). ASUS is sending me a M3N-HT Deluxe HDMI in place of it. On the old board I ran 2 x 8500GTs in SLI. I see that the new board supports 3-way SLI and also Hybrid SLI. My question is, can they be used together... example...
  6. A

    Very Upsetting... Can't Get ForceWare 180.43 Installed?!?!

    Check out Step #7... replacing the .inf file... it's what everyone has to do unless they have the newest cards. Yes, 8500GT SLI, lol... I traded my buddy a laptop for this current desktop. It's what he had in there. They aren't THAT bad. It's the ASUS TOP editions. They have the massive...
  7. A

    Very Upsetting... Can't Get ForceWare 180.43 Installed?!?!

    I cannot get these drivers to install... period?!?! I have tried... 1. Remove Old Drivers through Add/Remove Programs 2. Reboot in to Safe Mode 3. Run Driver Sweeper 1.5.5 4. Run CCleaner 2.13 5. Reboot in to Normal Mode 6. Extract drivers to archive folder 7. Replace stock .inf with...
  8. A

    how to access Westell 6100 from behind router?

    unfortuneately, that page has nothing to do with my question :(
  9. A

    how to access Westell 6100 from behind router?

    Right, I have understood that all along... the problem is, I want to access the Modem (at any given time) without having to swap it back to PPPoE or plug a PC directly into it. I have done this numerous times with other Modems... this issue is specific to Westell 6100 (or similiar) and certain...
  10. A

    how to access Westell 6100 from behind router?

    Yes, I have tried 192.168.1.1 along with a LOT of other addresses (as I stated above). I have tried manaully changing the IP Address of the modem and router (so they wouldn't be in conflict)... that didn't help. I am a computer technician and very familiar with networking and routers. This is 1...
  11. A

    how to access Westell 6100 from behind router?

    Forward the IP of the modem in the router configuration? What are you talking about? I don't know the modem's IP... that is the problem here?!?! And what would I forward the modem's IP to (and why)? I don't think we are talking about the same thing here. I have never had to forward any ports...
  12. A

    how to access Westell 6100 from behind router?

    Jack, that's not the answer I'm looking for :) I may not "need" to access the modem... but I would still "like" to. I like to look at the event logs and speed tranfers. You are correct about hooking a PC directly to it, but I am wanting to avoid doing that everytime. bruceb, I have the...
  13. A

    how to access Westell 6100 from behind router?

    What do you mean when you say "Make sure the router is set to pass that ip range"? Thanks for the link :)
  14. A

    how to access Westell 6100 from behind router?

    Yes, the Westell is acting like a modem only now (no DHCP). I have tried to set a static IP Address for the modem (192.168.2.254), but it didn't work. I have verified I was on the 192.168.2.x subnet. I tried 192.168.2.1, 1.1, 0.1, 100.1, 2.254, 1.254, 0.254... I didn't try 0.100 (or any x.100...
  15. A

    how to access Westell 6100 from behind router?

    Greetings, The setup is Verizon DSL with a Westell 6100 modem/router combo acting as a modem only connected to a Linksys WRT54GS router. I am just trying to figure out how to access the modem now? A lot of cable modems will be accessible via the address of 192.168.100.1, but that isn't the...
  16. A

    what is the best USB dial-up modem available?

    That's one option... but there has to be a good USB modem out there...
  17. A

    what is the best USB dial-up modem available?

    nothing like that is available where I leave... we don't even have cable TV... we use DirecTV
  18. A

    what is the best USB dial-up modem available?

    #2 seemed fine until the last part about ISPs. I use AOL :(
  19. A

    what is the best USB dial-up modem available?

    Still can't get Broadband in my area (yes, it REALLY sucks)... I was using a nice USR 56K v.92 Performance Pro modem, but it went bad. I am now looking to replace it and I would like to go with something USB. However, I don't think I want a "sucky" modem... I want a hardware modem with V.92 and...
  20. A

    Way to Disable Clock Throttling on 7900GT?

    You can also use NiBiTor to remove Thermal Throttling from the BIOS.
  21. A

    Should I overclock my 7900GT KO or my Opteron 165 first?

    huh?! :shocked: I have NEVER seen this to be true...
  22. A

    Voltage limits of X1900XTX

    :thumbsup:
  23. A

    1 am2 emm 2 am2 cpus

    Post some more info :)
  24. A

    anyone have any info on upcoming Forceware 85.10...?

    I don't really have a 'source'... I just heard some guys talking on a message board about how they heard 85.10 was coming soon and it was supposed to have AA enhancements.
  25. A

    anyone have any info on upcoming Forceware 85.10...?

    just curious :)
  26. A

    K8N Diamond - 4GB RAM only running at 333MHz?!

    Peter, yeah... however, I prefer MemTest for Windows. I have seen it fail when the standard MemTest will go 8+ hours fine...
  27. A

    K8N Diamond - 4GB RAM only running at 333MHz?!

    RESOLVED!! I updated to the 3.0A Beta BIOS (just released on 3/21/06) and the problem has been fixed. I am now running 4GB (4 x 1GB double-sided) at 400MHz (2T of course :) )
  28. A

    K8N Diamond - 4GB RAM only running at 333MHz?!

    Okay, I just got back to work and re-read the book... It is possible to get 400MHz with 2 DS DIMMs (I previously stated 1)... The slots are just a little different on this motherboard (on the DFI, you match Orange and Yellow... or this one you match first 2 (Blue and Purple) and last 2 (Blue and...
  29. A

    K8N Diamond - 4GB RAM only running at 333MHz?!

    I was building a PC at work for a customer and ran into a snag. It's a MSI K8N Platinum Plus, Athlon 64 X2 4800+, 4GB PC3200 RAM, and a MSI GeForce 7900GTX. The system is running 4 x 1GB chips. I did successfully enable to MemoryHole option in BIOS to enable the entire 4GB of RAM... However, my...
  30. A

    an honest question about the Conroe vs. FX-60 tests...?

    How were the CPU 'overclocks' chosen? I mean, the Conroe was running at a 23.07% overlock, whereas, the FX-60 was running at a 7.69% overclock? Let's put aside some of the responses like: 1. The FX's multi was raised, so no HTT overclocking was done, hence making the FX slightly less...
  31. A

    2 questions about XFX 7900GTX XXX...?

    1. Does anyone know if this card uses 1.1ns or 1.2ns memory chips? 2. The reference 7900GTX's memory is clocked at 1600MHz (vs. the 7800GTX-512's memory at 1700MHz), however, the 7900 is rumored to have tighter timings. I am wondering if cards such as the XFX XXX and eVGA Superclocked have...
  32. A

    Why has Intel already been declared the new Performance King?

    Actually, I didn't want to get involved in one of the existing troll-a-thons. I am not arguing about performance here, just stating that claiming a victory for Intel, six months before the CPU is even supposed to be released, just doesn't sound logical to me.
  33. A

    Why has Intel already been declared the new Performance King?

    I have purchased both Intel and AMD products, and I'm not bias towards either company. In reference to the Conroe chips... We all know AMD is the current performance leader... and AM2 is the next thing coming out. So if anything, AMD will pull ahead a little more. I understand that Conroe...
  34. A

    SLI patch: makes all dual pci-e mobos SLI capable

    I have PERSONALLY verified this. Do you have a DFI board? If so, give it a try. You will see the second PCIe slot will NEVER run at x16 (only x8). I'm not sure why people keep arguing this. It's simple to understand really. If you still don't believe me, do some searching. I have seen some posts...
  35. A

    SLI patch: makes all dual pci-e mobos SLI capable

    I didn't mean for it to sound like I was "jumping on" the OP. I was just trying to imply that possibly he hadn't worded it the best, and I was attempting to clarify exactly what the DFI boards are capable of (since I have personally performed the Ultra-D to SLI-D mod myself). The wording was...
  36. A

    SLI patch: makes all dual pci-e mobos SLI capable

    DFI does NOT have ANY nf4 boards that are SLI x16. It doesn't matter what articles have appeared. The Ultra-D, SLI-D, Expert, and NEW Venus (yes, there is another one) ALL have 2 "long" PCIe slots... HOWEVER, one slot is PCIe x16 and the other slot is PCIe x8. When ran in SLI mode, BOTH slots...
  37. A

    what advantage does a hub have over a swicth? yes you read that right :)

    yeah, my above response was for Cooky... I am not aware of hubs boosting signals greater distances
  38. A

    what advantage does a hub have over a swicth? yes you read that right :)

    yeah, that's it... most older switches didn't support it, however, a lot of the newer ones do