Greetings,
I am looking for a new 1TB hard drive (not a SSD at this time). I have been doing a little research and came to the conclusion that the Samsung F3 and the Western Digital Black are probably the two fastest 7200 RPM drives right now.
I was looking at this Samsung F3 drive on Newegg...
My M2N32-SLI Deluxe Wireless Edition motherboard died (it was under warranty). ASUS is sending me a M3N-HT Deluxe HDMI in place of it. On the old board I ran 2 x 8500GTs in SLI. I see that the new board supports 3-way SLI and also Hybrid SLI. My question is, can they be used together... example...
I cannot get these drivers to install... period?!?!
I have tried...
1. Remove Old Drivers through Add/Remove Programs
2. Reboot in to Safe Mode
3. Run Driver Sweeper 1.5.5
4. Run CCleaner 2.13
5. Reboot in to Normal Mode
6. Extract drivers to archive folder
7. Replace stock .inf with...
Greetings,
The setup is Verizon DSL with a Westell 6100 modem/router combo acting as a modem only connected to a Linksys WRT54GS router. I am just trying to figure out how to access the modem now? A lot of cable modems will be accessible via the address of 192.168.100.1, but that isn't the...
Still can't get Broadband in my area (yes, it REALLY sucks)... I was using a nice USR 56K v.92 Performance Pro modem, but it went bad. I am now looking to replace it and I would like to go with something USB. However, I don't think I want a "sucky" modem... I want a hardware modem with V.92 and...
I was building a PC at work for a customer and ran into a snag. It's a MSI K8N Platinum Plus, Athlon 64 X2 4800+, 4GB PC3200 RAM, and a MSI GeForce 7900GTX. The system is running 4 x 1GB chips. I did successfully enable to MemoryHole option in BIOS to enable the entire 4GB of RAM... However, my...
How were the CPU 'overclocks' chosen? I mean, the Conroe was running at a 23.07% overlock, whereas, the FX-60 was running at a 7.69% overclock?
Let's put aside some of the responses like:
1. The FX's multi was raised, so no HTT overclocking was done, hence making the FX slightly less...
1. Does anyone know if this card uses 1.1ns or 1.2ns memory chips?
2. The reference 7900GTX's memory is clocked at 1600MHz (vs. the 7800GTX-512's memory at 1700MHz), however, the 7900 is rumored to have tighter timings. I am wondering if cards such as the XFX XXX and eVGA Superclocked have...
I have purchased both Intel and AMD products, and I'm not bias towards either company.
In reference to the Conroe chips...
We all know AMD is the current performance leader... and AM2 is the next thing coming out. So if anything, AMD will pull ahead a little more. I understand that Conroe...
I have a Lian-Li PC-60 Plus case with a rear 80mm fan... I was going to mod it to 92mm (by cutting the case), until someone suggested just using a fan adapter. I have a few questions about fan adapters... All the pics I see look like they mount into the stock 80mm holes then on the other side...
http://www.titan-cd.com/eng/vga/cuv2abrhs.htm#
I am looking for that cooler kit. It is revision 2 (comes in the white package with blue RAMsinks in bottom right corner). I have been trying to buy ths thing for 2 days with no luck :(
HELP! :)
-Thanks
Thinking of upgrading from my XP-90 to a Ninja. I was wondering if the Ninja 'blocks' anything... such as the closest PCI-E slot (the smaller one)?!
-Thanks
I have a PC-60 Plus and it has been working out just fine. I am now in the middle of a few upgrades. I thought it would be a good time to increase my airflow and make things a little cooler. I am going to be replaing all 4 case fans with high speed Panaflo's and controlling them a with fan...
1.6ns RAM = 1200-1250MHz effective
It seems to me that most 7800GTs (with decent cooling) can reach 1200-1250MHz on the RAM... that sounds on par... however, it seems that most 7800GTXs (with the same decent cooling) can reach upto 1350-1400MHz on the RAM?! Can anyone explain this? I thought...
Greetings,
After reading the o/c results of users that have upped their voltage to 1.5... it seems that ALL of them are reporting high clocks on Core and Memory. I was just wondering if somehow the bump from 1.4V to 1.5V, increases more than VCORE, and possibly VDIMM also...?!
-Thanks
Greetings,
I have a Maxtor MaXLine III 7B300S0. It most reviews, it seems as if it's the best competetion for a Raptor 74GB. If we could please overlook the infamous following common responses for this thread, please...
1. RAID0 offers no real performance gains for the typical user
2...
I'm not looking for exact numbers here... just a little curious and kind of bored :) Which PC would probably score higher in 3DMark05... PC #1 w/ SLI (MUST remain stock, NO O/C) or PC #2 w/o SLI (a pretty good O/C)...? Approx. scores would be greatly appreciated :D
PC #1
----------
AMD...
I have been reviewing the specs, pricing, and availability the current generation's graphics cards... to help me determine which card I'm going to replace my X850XT PE with... I have been searching the forum and reading around for info... I have compiled a chart below...
7800GTX - Released...
I'm looking for an internal 5.25" USB Card Reader. I need one that has the 5 card slots and 1 USB slot. I can't seem to find one like that... has anyone possibly came across something like this?
-Thanks
I have misplaced the rear duct cover that goes over the back of the power supply... I have also misplaced 1 thumbscrew :brokenheart: I tried contacting Lian-Li and Directron, but got no responses :frown: Does anyone know where I could possible get replacements?!
-Thanks
Does the ATI TV Wonder Elite have a hardware MPEG-2 encoder AND a hardware MPEG-2 decoder?
Also, does the Remote Wonder Plus (comes with the TV Wonder Elite) work within Windows Media Center 2005?
-Thanks
I am thinking of replacing my Zalman 7000B with an XP-90. I need a good fan to put on top of it. Everyone seems to recommend Panaflos. The 92mm Ultra pushes 68.8 CFM but doesn't seem to have RPM monitoring capabilities. Apparently all normal "1A" fans don't support it. You have to get one of the...
I am having an issue with this motherboard. When you go into BIOS and set the Memory Timings to MANUAL and insert your preferred settings, they will save into BIOS. If you exit, then re-enter... you will see they have stayed at the manual timings you specified. HOWEVER, when you boot into...
I have a BBA X850XT PE with an ATI Silencer 5 rev2... ATITool and ATI Tray Tools BOTH report my Max Core as 616 (when Mem is not overclocked) and Max Mem as 632 (when Core is not overclocked). However, I always get 1-2 artifacts when I run 616/632 together... Right now I am rock solid and...
I am curious as to the difference(s) between Maxtor's DiamondMax line and their MaXLine drives? I know the MaXLines have a longer warranty and are "designed" for business... but what I really want to know is how they compare in performance? Which is faster, etc...
Specifically the DiamondMax...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.