I guess the problem was updating new firmware while ssd as a primary drive and windows loaded on it.New firmware dynamics and enhance trim support might have caused this issue.I think it's just like updating new driver and restarting system.Our restart was secure erase with a fresh copy W7.Well...
Wow.I fixed the problem guys :sneaky:
I did the secure erase method again and installed a fresh copy of windows not a clone and now everything is ok :awe: My write speeds turned back to normal :) Here it is guys.
Thank you Coup27 for helping me to fix this problem.I owe you one big...
Yeah AS SSD use incompressible too and here's my answer to them as much as possible with English :)
Screenshot is attached(first screenshot, my values).Thank you for your reply but i already told you i dont have any problem with compressible data speeds.What i'm saying is very...
Reply from Kingston;
"The reason why we want you to run ATTO is because some bench marking software i.e., CrystalDiskMark, AS SSD will not provide accurate information for Sanforce based drives due to the drive's getting a lot of it's speed from compressing data. Crystal Disk and AS SSD uses...
Of course I will.I' ve paid that money to see how fast it is.Of course I'll do some benchmarks.I don't care about it's lifetime now.My thoughts changed now and i don't care about the longevity anymore.Sooner or later it's gonna die because of sandforce controller.If i dont like it's performance...
I did secure erase method but absolutely nothing changed :) even 5 mb/s :D and Kingston technical support representative replied like this;
Hello Alper,
Sorry to hear you're having this problem but in order to assist you to the fullest, we will require that you please submit the proper...
Update!
I've disabled c3/c6 state from cpu settings and now 4k random and sustained read,write speed increased :) This was an issue with most of the gigabyte motherboards.There are so many threads about this and hopefully my disk is faster but i'm sure if i didn't update firmware and disable...
Well if secure erase do any good i'll try it.But i still can't understand how this firmware affected writing speeds ?Writing speed is still good at compressible data. Total read and write was 300 gb when i updated it.
Actually new firmware supposed to improve writing speeds.Release notes say so. AS SSD score with stock firmware was 360 but now it is 300.sometimes below 300.I didn't understand anything.If i knew i wouldn't update the firmware
Hi guys;
I have a Kingston V+200 90 gb sata 3 ssd with SF-2281 controller.After new 501 firmware (stock was 322)writing speeds reduced by %20.I use AS SSD and CrystalDiskMark for benchmarking and i noticed sequential and 4k writing is lower than before.I know this ssd sucks at incompressible...
My bios flash gone wrong and i cant even see the card installed.atiflash says no adaptor found.so i decided to hotflash the bios but i'm not sure which is the bios chip.
i tried tweezer method but no luck.
hi guys
i know there are lots of vmod application on forums but i couldnt find any sparkle 8600 gts layout.here is back of my card.i have multimeter but dont wanna solder anything.i just want to know where should i do the pencilmod.please figure out the photo.IC's are indicated on photo...
my friend told me that when they're moving to another apart .the computer case had fallen to the ground and when they opened the case card was out of pci-e slot and some scratches on the card.here are the pictures
they look like soft scratches but i want to know if they killed the...
i took the card from my friend.he was using 750 watt powersupply.one day the card failed and i took it and tried to resurrect it.i havent used the card with my system.i'm trying to repair it..
thank you for your suggestions and helps.i really appreciate.i checked those cubes(think they are resistors or capasitors)they look okay each R10(cubes whatever it is :))has two legs and soldered well.should i re-flow the solders with a heat gun on second gpu?do you have any more ideas please...
card is dismantled already.it looks like theres no physical damage on second pcb.i checked the wiring and soldering points or bad contacts looks ok.the thing is fan controller is in second gpu and it works too.imagine a dead card when you power on fan spins %100 and no boot at all that the...
Hi guys,when it comes to techical advise.this website is the one to go.
I have a GeForce GTX 295 dual PCB version graphics card but it shows only one graphics device in GPU-Z and doesn't boot. I have 600W Cooler Master power supply with two 6-pin PCI Express power cables and don't have 8-pin...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.