I'm going to put together a P67 computer with a ASRock Fatal1ty P67 Performance board just for cruising around on the internet. The board has one PCI Express 2.0 x16 slot which I need to put a video card in. I just need to know which card would be good budget card and run's s cool.
GeeksCom...
I have it down to two choices:
1)Swiftech Apogee Drive II
2)Swiftech MCR220 "Quiet Power" 2 x 120mm Radiator w/ Reservoir (MCR220-QP Res)
3)Swiftech Micro Res Rev. 2
4)3-2 packs of Swiftech 1/2" barbs
5)10 feet of 7/16 x 5/8 Primoflex Pro LRT tubing
OR
XSPC Raystorm 750 RX240 Extreme...
Is anyone selling older type PSU's? In the 375W to 525W range.
I need one that has more molex connectors(6?) then sata. I only need two sata connection's on a single line. I do not need any PCIe connectors either. One 20 pin plus one Four pin power connectors.
I have a Enermax EG365P-VE but...
I made a mistake, I dug up the MB out of my basement to put in a case and noticed that it is the SYS_Fan1 header that is blown Not the CPU_FAN header.
There was a solder lead that connected from the fan header to the PCIe-1 connector. It melted under the soldermask and is exposed now and only...
I can fit a RX240 Rad in the bottom of my case running two fans in push configuration. I am running a 3770K at 4.4 with a Archon cooling the chip. Linx get's the chip to 82c load and my encoding program gets the chip to 72c load.
for grins I want to try 4.6 or 4.8 but want to switch to water...
I have been thinking about trying WaterCooling for the first time.
What setups do you guys have for your Storm Trooper cases?
I was thinking about making this easy and getting a H100. I also would like to know how people manage to get push pull on top of the Storm Trooper. I don't see the room...
It's been mentioned over and over again that people are going to wait till there's a new stepping of Ivy Bridge that will run cooler. Is this intel's usual practice or just wishful thinking on people's part?
I'm asking cause I want to buy a 3770 and can wait for a better chip if need be.
I am interested in one of these two boards.
ASRock Z68 PROFESSIONAL GEN3
GIGABYTE GA-Z68XP-UD5
They both are the same price.
I am mostly interested in which one would be the better overclocker.
I do encoding and photoshop stuff and play no games at all.
I sure do like to tinker with...
Will the prices come down much in the next two or three months?
I can get one now for $195 at MicroCenter but don't want to wait for the price just to go down $10 or $15.
Thanks
I ordered a 2500K and am trying to pick one of these boards for a high overclock.
I like the Deluxe for it's extra cooling and extra phase's but in the real world will it really help get me a higher overclock then the Pro? I know a lot depends on the chip but I pray that I get a good...
Well I just fried my GA-EP45-UD3P board and am kinda upset but I press forward. I want to get into the Z68 i7 2600k or I5 2500k world. I like to overclock a lot and do a lot of video encoding and Photo editing. I do not dot game at all.
I'm very interested in this board. Can it give me a...
I've been researching which fan controller I should purchase and am thinking about the Sunbeam RHK-BA 5.25" Black Rheobus or a Sunbeam RHK-EX-BA 5.25" Bay Black Rheobus Extreme for my seven San Ace fans but I read some reviews on the Rheobus Extreme that it gives off a lot of heat which seems to...
Yate Loon D12SH-12 = $7
Bearing: Sleeve
San Ace 109P1212H401 = $12
Dual Ball Bearings
Both are 88.2 CFM and 40db
120mm x 120mm x 25mm
Is the San Ace worth the extra $5?
Will this board overclock quad-core chips to 4.0Ghz. I'm thinking of the Q9550 chip.
It's the only board you can still buy new from retailers. Instead of trying to get a used EP45-UD3R.
I'm trying to decide which drive would make the better OS drive. I'm going to use the drives for mainly encoding and the second drive will be for the "work folders" since I'm using DVD-Rebuilder which requires a source HD then to a work folder and lastly to a output folder.
Just trying to get a...
I'm looking to replace my Epson 820 so I would like to know which printer is as good or better and takes cheap non oem ink cartridge replacements. I print some photo prints but not a lot and Dvd covers.
Thanks
Are the Marvell 6G Sata controller/ Marvell 88SE9123-chip'd cards specifically made for the intel chipset motherboards? I'm trying to put in a PciE Sata controller card in my computer to get a third drive working but the Marvell based cards won't let my computer even boot up with them in. I'm...
I've been running a Pci-e graphics card and and four Pata HD's and then tried out the two Sata slots on the motherboard and what a difference and do not want to go back to pata but need one more sata HD and bought a Pci-e sata controller card and put a AGP graphics card in the AGP slot and...
I was wondering if there was a really big difference in Seek Time's between these two drives that would be noticed in real world use. I'm looking for a decent OS hard drive with very good seek times.
Thanks
At first I wanted to get a PCI sata controller card and after reading that it will limit the Sata-II speed because of the 33mhz bus. Now I am wondering if a PCIe Sata controller card might allow the Sata-II hard drive reach it's potential. I have a PCI Express x4 slot with a graphics card in it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.