Search results

  1. F

    Gigabyte+SSD issues

    <quote> M.I.T. -> Advanced frequency settings -> Advanced CPU core features -> C3/C6 State Support [AUTO] F5 : OK, no write bottleneck F6 : Not OK, write bottleneck F7A : Not OK, write bottleneck <quote-end> When u left the option in "AUTO" which means u don't care what BIOS rule gave for it...
  2. F

    Gigabyte+SSD issues

  3. F

    GIGABYTE GA-Z68X-UD4-B3 Takes forever to come out of suspend

    Give nothing about ur system configuration, how do people help u?
  4. F

    FM1 'southbridge' temp question

    BTW, the highest operating case temperature of Hudson is 105C. If you still be able to place your finger tip on the heatsink for more than 2 seconds. You won't need to worry the chip down below.
  5. F

    FM1 'southbridge' temp question

    The TMPIN2 in HWMonitor Pro is the compensated APU temperature (with offsets to be more accurate as Tcase). The TMPIN0 is the system temperature, data from the thermal-resistor placed on the motherboard. While the TMPIN1 is not used as a temperature sensor from IT8720F. You may ignore the...
  6. F

    Gigabyte P67 UD3 - how to set hard drive to IDE?

    The option is called PCH SATA Control Mode, which is located in the Integrated Peripherals menu.
  7. F

    GA-P67A-UD3 RAID Issues

    If you install your operating system in IDE or AHCI mode, but will use that same hard drive (where you install the operating system) for RAID mode. Then you will need to configure it in the RAID BIOS, and you will need to reinstall the operating system.
  8. F

    vdroop with the GA-P67A-UD3 board

    So u would like the Vcore to keep what u gave in BIOS when CPU under full loading? If that is the case then set the LLC (Load Line Cal.) to Level 1. That will try to keep the Vcore u gave in BIOS. Level 2 will keep what Vcore u gave and over it!
  9. F

    P67A-UD3 Problems (Update: Problem with PS not mobo)

    Load Opt. defaults and do nothing. Start using your system until everything is stable. What is your current BIOS version?
  10. F

    Gigabyte H67 + 2600K = integrated graphics fail

    Update your BIOS! http://www.gigabyte.com/products/product-page.aspx?pid=3654#bios
  11. F

    Gigabyte P55A Rev1 & Rev2 Differences

    Support On-Off charge even in S3/4/5 states.
  12. F

    Gigabyte fraud? H55 as P55

    Naming P55-US3L does not mean that Gigabyte must use P55 chipset for this model. It's their naming policy and their rights... Just like BMW F10 5-series, 523 is not using a 2.3 liter engine... you call it is a fraud too? Better to remove the title "fraud" in case of any lawsuit happens...
  13. F

    Help: My Gigabyte P55 gives multiple short beeps during cold boot

    Doing any OC? Try loading Opt defaults and disable XMP (if there's). Did you turn off the main switch on your power supply? Also disable EuP if there's any.
  14. F

    GA-55A-UD7 and I7-860

    With the working option, it is the good option for your system. For Loadline... refer this: http://download.intel.com/design/processor/datashts/322164.pdf Search keyword" loadline
  15. F

    Sound from around the CPU area (not fan) on drive access

    Have you done any changes to the voltage in the BIOS? Try loading optimized defaults.
  16. F

    Do we have Gigabye Rep here ?

    What have pissed off you!? Share some... Problems in getting the motherboard to RMA? Or???
  17. F

    Some questions about USB on the Gigabyte US2H

    Ports with LAN and ports with ESATA&1394...
  18. F

    Help with getting a post on ga-p55a-ud4p with hx1000

    Try re-seating your processor. When you remove it, check the contact pins on the board, not a single pin should be bent. When you put the processor back, apply some pressure with your hand and gently shake it. What is your PSU model?
  19. F

    Second GA-P55-ud3r Exact same post problem???

    Did you also turn off the PSU main switch after shutting down the system? Try to manually assign the memory related voltages in BIOS rather leave it for "Auto".
  20. F

    Non-standard pinout on Gigabyte GA-P55A-UD4 front panel audio HDA-port

    Can't see any difference between Sense_return and GND. Aren't they meaning the same thing? Any body got problem using the HDA front panel? This board is WHQL certified, I don't believe that a non-standard board can pass this test.
  21. F

    P55M-UD2, question about the SYS_FAN header

    It can not disable by BIOS, maybe getting a molex converter could solve your situation. Convert the header directly from the big 4-pin ATX connector.
  22. F

    Gigabyte P55-UD4P Power Error

    PSU problem??? What's the brand and model of the PSU? Try connecting HDD, ODD and other stuffs to the PSU and boot the system again.
  23. F

    Gigabyte GA-P55-UD4P de-activates 2 DIMM slots

    Rus: Thanx~~ Mak: Have contacted Gigabyte support? Wondering have you changed any thing in BIOS, could you share your BIOS settings? Each item you have changed from its original state. I may implement these settings on my friend's system.
  24. F

    new system problems, gigabyte - p55m-ud2

    Just wondering what you used to put underneath your mobo, don't used the black sponge where it came with the box. There are beeps which can determine that mobo & CPU are good since they can still do self debug. Try clear CMOS while your CPU & memory modules are on the board~ and try to boot...
  25. F

    new system problems, gigabyte - p55m-ud2

    Try put your memory on the white slots first~
  26. F

    Gigabyte GA-P55-UD4P de-activates 2 DIMM slots

    Mak: I got my friend's PC for a test just now, it seems everything works fine there. Although my friend's PC has used up G.Skill DIMMs. You said DIMM #3 & #4 are missing with capacity info inside MIT status, will it be a hardware failure? CPU and memory? Possible to change or re-installing it...
  27. F

    Gigabyte GA-P55-UD4P de-activates 2 DIMM slots

    interesting... my friend has a similar build, could you share some photos about the DIMM 3 & 4 deactivated??? maybe i could borrow my friends PC for some testing~~~