Search results

  1. S

    External WD my book HD losing trasfer rate to zero

    I have WD My book 4tb external HD for few years. Suddenly it started losing transfer rate and down to 0. I have other WD drive, no issue. I tried on different laptop same problem. Transfer start with good rate than suddenly started going down.
  2. S

    Hotmail account hacked

    My Hotmail account account hacked 3rd time in recent months. Someone can send junk E-mails from my account to my contact list. I changed password, still same issue. what is the remedy? Does it has anything to do with facebook account? Thanks,
  3. S

    WinXP .NET frame initialization error

    I am trying to execure one application on winXP. I am getting .NET framwork initialization error "Unable to find a version of the runtime to run this application" I updated .NET with latest version still same error. Any help, please Thanks,
  4. S

    Need help for WinXP

    Please excuse me..I have few stupid questions 1. I want to install WinXP on another partition (Drive) and later make that drive C:\ drive (with OS) and install all the prograns from fresh. I have winXP running from C:\drive. 2. Is it possible to move all my drives and setting from one...
  5. S

    Need help to transfer drivers from one HD to another

    For some reason my HD crashed and wipeout my WinXP pro OS. I installed OS on onther drive. Is there anyway I can transfer all my setting, drivers, prog from old drive new and associate with new OS without reinstalling everything again? Thanks, shreeit
  6. S

    winXP PC freeze

    few days before I got malware. I was able to remove using malwarebytes, but after that my PC is freezing after running sometime. First thing I thought about temparature. I kept cover open and have fan next to it. Still it freezes after runing PC for few min. I am running winXP sp3. I hope it has...
  7. S

    nesty avs.exe virus screwed up my OS

    Hi: I got AVS.exe malware. I deleted that file. but now none of my *.exe file works. when I try to run any *.exe file, it ask which program to choose to run like any other extension? any easy remedy? if I reinstall OS (WinXP pro) am I loose all other programs and/or data? Thanks shreeit
  8. S

    XWT-RC018 PCI Controller card to add additional SATA

    All: I don't know which section is appropritae, so I am asking here.. I installed XWT-RC018 PCI Controller card to add additional SATA port. I connected SATA device (DVD-RW) through this card, but System does not recognized my drive. It does not gives me any error or prompt. My system...
  9. S

    Help PCI SAT Driver does not recognized

    Hi: I added PCI base SATA Driver to add more SATA port. I connected SATA DVD-RW through this card. my PC does not recognized DVD-RW. Do I need to update BIOS or anything else? Thanks, Shreeit
  10. S

    convering molex connector to SATA connector

    I have older PSU which does not have enough SATA connector. Is there any way I can conver Molex to SATA. I noticed Molex connect or has 4 wires and SATA ahs 5 wires (One black extra). Is it possible? Thanks shreeit
  11. S

    Trouble installing adobe software

    Hi I am trying to install Adobe audition. I uninstalled previous version. I used Ashampoo uninstaller and regcleaner to clean registry. Still it's giving me error and asking me to uninstall previous version. What setup is checking? What should I use to clean up? I do have Adobe CS3 master...
  12. S

    delete a drive

    Hi For some odd reason Roxio added new drive on my computer DVD-DRIVE(G:), When I check properies of the drive it say's ROXIO DVD-ROM EMULATOR SCSI CdRom Device I uninstall ROXIO. How can I uninstall this drive? Thanks, Shreeit
  13. S

    Need Help - PC boot up problem

    I started getting error at the start up of my PC SVChost.exe - Application error The instruction at "0x7c9111de" refernenced at memory at "0x00000000" the memory could not read. I tried to boot up from XP CD, but same error. I have XP Home as operating system. is is virus or my HD...
  14. S

    Network adopter send wrong MAC address

    Folks: I have MOBO build with network adopter. When I tried to connect to network router most of the time I failed. few times I succeed when MAC address send to route was different. I was talking with router tech person complain about not connected, he told me same thing. Is there any way...
  15. S

    Problem connecting PC to router

    Folks: This is nightmare for me. I am clueless. I have netgear wireless router with 5 ports. I was able to connect 2 wireless PC and one wireline, without any problem or doing anything special. I have trouble connecting another wire line PC. I tries both dynamic IP and static IP and check...
  16. S

    Boot problem - new PC Built

    Folks: I am trying to built new system with Intel MOBO D945PSN and Intel CPU Pantium D 2.8. I have 2 Gb DDR2 and PCI-E graphics card. My Boot sequence gives me following error. ANy suggestion? Intel(R) Boot Agent GE V1.2.28 Intel Boot Agent PXE Base code (PXE-2.1 Build 084)...
  17. S

    Need help: I/O intencive work makes CPU hot

    Folks: I have very strange problem. When I do I/O intensive work - Pericularly compressing DVD files or encoding DVD, my PC shut down due to over heating. I don't have any other instances similar problem. I kept my system running for few days -noproblem. I can burn CD/DVD without over...
  18. S

    Need Urgent help - Antec P180 case

    Folks: Anyone using P180. Please check one thing for me. how fan in back attched to the case? I removed from it and now I don't remember type of screw used. My suspicius is there are 4 screws made of rubber was used but I am not sure. Please verify for me. Thanks, shreeit
  19. S

    Need help with new build...No boot

    Folks: Please, please..I need help... I am trying to build new system. My config is as follows.. PantiumD CPU intel 945 Chipset MOBO 2 GB memeory 2 SATA drive 1 DVD-RW 6000GT PCI-E card Antec P180 Case (3 fans) FSP400 PSU (350 W) Everything connected. Power up and No boot...No...
  20. S

    Need Help to test MOBO

    My new system is not working. No power to fan. I tested PSU. PSU is fine. Now it's time to test MOBO. I connected PSU 24pin connector and 4 pin PIN to MOBO, CPU fan connector to MOBO, RAM and speakers. Anything else I need to connect to see if it's working or not? DO I have to connect power...
  21. S

    HD shows less capacity

    Folks: I just build a new system with intel P4 and XP Ppro. I have 1 SATA 160 Gb drive. When I Formated firsttime before installing OS it shows only ~95Gb. ANy suggestion to go beyond this limit? Thanks, shreeit
  22. S

    PSU question

    Folks: Very stupid question, but I am desparate. If I power just a PSU, should PSU fan start? Trying to debug my system. No power from PSU. I have Antec P180 case. Case has 3 fans with no connector to MOBO. Non of these fans working, SO just want to see if PSU is working or not. Thanks...
  23. S

    Antec P180 Case power problem

    I am trying to solve problem with my new build. I can't get any power. None of the fan including power supply fan are working. I am using Antec P180. Intel Pantium D processor and Intel MOBO. Non of P180's fan has connector to connect to MOBO. Should it be start no matter we have MOBO connected...
  24. S

    new PC build - heat problem

    Folks: I am trying(!) to build new system. I have Antec Sanota case with Itel 915 MOBO wit P4 HT CPU. 2GB RAM and PCI-E card. I did not connect any other I/O yet. My system starts and shut down in few seconds and It looks like from temparature, because next time when I power up it gives me...
  25. S

    New PC build. No power

    Folks: I build new PC. My configuration is as follows: Intel Dual core motehrboard + Pentium-D processor Antec P180 Case Fotran SAGA 400W PSU 2 SATA drive PCI-E card DVD-RW and CD-RW PSU came with SATA connector. 2 CASE fans and CD/DVD connected through 4 pin connector. MOBO...
  26. S

    ANy good use of empty flopy IDE on mother baord

    Folks: This is very stupid question. I have only one IDE drive on which I laready have CD-RW and DVD-RW. I have IDE port of Flopy drive empty. ( No flopy drive). I have SATA port to for my HD, but still trying to Squeez one P ATA drive. Can I use/convert Flopy port on my motherboard to...
  27. S

    Q: Raid 0

    Folks: I have simple question. WHen do I need RAID0 card? I am buildding system with 2 to 3 HD. 1 ATA and 2 SATA. Do Ineed any additional card? Thanks, Shreeit
  28. S

    PCI-e Video card under 150!...need suggestion

    Hi: I do not have any knowledge about this so excuse my question. Looking for reasonable price (around 100~125) PCI-e card for PC I am building. I have intel motherboard with Pentium D processor. I am not hard core gamer. Most of my work is with Photoshop, amature video editing and kids...
  29. S

    Lost blocks on HD

    When ever I delete big file from my HD (> 1Gb). My HD does not show the deleted space immediately. Eventuly its shows, mean while I can not use the space I created deleting file. I have wix XP Home as OS. ANy tool or process makes HD space vacant immediatly Thanks, Shreeit
  30. S

    Copy file listing from window explorer

    Is there any way I can copy file listing (name field) from directory in window explorer? Thanks, shreeit
  31. S

    Pl. help...CPU over powered by processes

    Hi: For some mistirious reason, my client's laptop over powered by some process/es. showing 100% cpu usage without runing any programes. I can't even run msconfig or regedit. It was working fine before, so I know that is not the problem. It has win XP pro OS. If I run in safe mode, it shows...
  32. S

    Q: Uninstalling Norton Antivirus Corp. edition

    I have Norton Antivirus corp edition vesrion 7.6. One of my "Optimizer" application screwed up my NA application. Now I can't delete or reinstall Antivirus iapp. It is asking me for password which I never set up in first place. How can I delete Northen Antivirus, so that I have clean install...
  33. S

    Too many svchost processes running on PC

    Please pardon my lack of knowledge. I noticed there are too many ( 3 by system, one by LAN and one by WAN) running on my PC and they control big chunk of my memory. Can some one explain, why so many and any way to optimized? I am using WLAN for connection and also have additional NIC card and...