Anyone highly skilled with Hyper-V? im trying to setup virtual machines and had a couple questions setting up multiple keyboards and mice. Im pretty new to the hyper-v so any help would be appreciated.
I'm trying to setup one computer for each side of a friends tattoo shop. I was trying to run 4 monitors off the one computer and be able to have separate desktops with a mouse and no keyboard . Basically the setup will be there for customers to look thru drawings and tats. Possible to SLI 2 cars...
i have windows 7 ultimate. i am trying to save some files for my friend from her hard drive. so i plug the sata drive up to my computer. loaded windows and windows sees its there. i go to computer, manage, disk management and that knows its there as well. in disk management i go to properties...
not sure wth is up with this thing. It's a pesario 5245. not sure on all the specs. i am trying to install a 200gig HD in it with a fresh copy of windows xp on the HD. everytime windows install gets to 7% it starts to get errors alot. i tried to switch out ide cables and stuff cause i have had...
I have DSL SBC. I didn't really start noticing this problem till about a month ago. My connection keeps timing out or lossing a massive packet loss. i lose connection from the net for about 1 min then it's back again. i am thinking its the router nothing else i can think of SBC ran a line test...
I have a co-worker who has a Dell. His dvd burner went out little bit ago and he said before that he could burn dvd's just fine. I bought him a NEC burner replacement from newegg. I tested that burner and my lite-on burner in my comp and both copy a store bought dvd just fine. When i put any...
I got all 3 computers running fine with the internet. i setup up a home network thru the XP wizard. i went to view all computers on the network and they all show up. The problem i am having is that when i try to install the shared printer on the others computers (not the one that is the main...
Well it's a compaq POS :). i reformatted the hard drive. before it had 2 partitions C, and D. I deleted both and then reformatted the drive to just C with NTFS. I think the operating system on it before was Win98. So after i reformatted the hard drive and setup the partitions windows XP CD...
I have a realtek NIC 10/100mbps NIC card. I use SBCyahoo DSL. I can connect to the net and everything just fine. But the connection for the NIC card down at the bottom right by the clock shows a ! and says limited or no activity. Can anyone tell me why this is and what i need to do to fix it...
i installed a new processor and it started up and then all of a sudden shutdown. now i hit the power button and the computer acts like it is trying to boot but i get nothing. no video on the screen or anything. just the lights from my led fans and then 5 seconds later the power shuts off. anyone...
i installed a new peocessor and it started up and then all of a sudden shutdown. now i hit the power button and the computer acts like it is trying to boot but i get nothing. no video on the screen or anything. just the lights from my led fans and then 5 seconds later the power shuts off. anyone...
anyone have a good link on how to unlock the barton 2500. i bought the little unlocker from frozencpu but it doesn't seem to work. would appreciate it.
if i have a video card that has the ram on one side of the board would it be safe to place ramsink on the back side of the board pretty much straight on the board? or would that not be wise??
i bought a 5900 and flashed it to a 5950. when i play raven-shield i get a constant rate of 59fps no matter what i do. is this the limitation of my monitor?? i have everything set at 85htz refresh at 1024x768. it's a phillips crt monitor.
lots of my friends are getting higher frame rates so i...
my setup is athlon barton 2500, 1gig kingston hyperX pc 3500 and an NF7-S by abit. my question is i see lots of people doing the 2500 up to 3200 with no problem. what do my settings need to be at. eveytime i try to go to 3200 speeds the bios and stuff loads but windows will not. i have the...
anyone have a gainward 5900 that they updated to a 5950?? i downloaded the 5950E300 and then tried to flash using nvflash.exe 5950e300.rom and it said i had the incorrect version. i was wondering since many people are doing it what did i do wrong or did i not get the right drivers??
i need help making a bootable CD to flash my bios. i tried using drdos image and it looked like it loaded fine but then i couldn't switch over the the cd-rom drive to use the flash tool. i have no floppy drive so that is why i need a bootable CD. anyone have an image they could send me or tell...
i installed an ati 9700pro that a friend gave me. i'm not sure what is going on. i installed the ati catalyst drivers without the control panel. i then installed the ati omega drivers so i can get better performance from the card for gaming reasons. now the card will not run throw the #Dmark...
can you overclock ati cards by just going into the display properties and changiing the clock settings?? if so where can i get the download to open up the clock settings??
sorry newbie with ati cards always liked geforce cards till recently
i downloaded 3dmark to test my video card out but i can only get it to run test 1 right. when it goes to run test 2-4 i only get like 3-5 fps. i have a geforce fx 5200 128meg. anyone know the reason it's running like this??
on the abit nf7-s i can go as high as 99mhz for the AGP i'm not really sure on this i have it clocked to 75mhz now what are some opinions and this just helps faster data rate?
i bought a athlon barton 2500 and also bought the unlocking kit from frozen cpu. i see lots of people overclocking to 3200+ but mine won't even get close. i was running at 12.5 at 180 and everything seemed fine but then my computer just shutdown. i have an Abit board nf7-s with a copper heatsink...
i am trying to burn cd 2 of ravenshield. my roomie lost his copy and now we can't play at the same time anymore. i was wondering if anyone had some ideas as to a cd copy program that would copy this. i tried a couple and they didn't work, or maybe i copied it wrong.
Thankz
i need little help setting up my raid. i have an Iwill kk400-rs and my raid array is setup with 2 western digital drives the same model. one is set to master the other is set to slave. it combines the size of both drives so it reads one. it shows up in my computer. i'm running Windows Xp pro...
i need little help setting up my raid. i have an Iwill kk400-rs and my raid array is setup with 2 western digital drives the same model. one is set to master the other is set to slave. it combines the size of both drives so it reads one. it shows up in my computer. i'm running Windows Xp pro...
anyone know how to reset the password so i can get into the admin area of the linksys router, i have a BEFSR41? i bought it from someone and i can't get into it???
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.