I've tried both mini DP connections on the card with 3 different active dvi=>mDP adapters on all 3 monitors & the one that won't turn on is always the one that is connected to the mDP port
The problem seems to be only with my monitor that is connected via mini display port. The other two monitors are connected via dvi and work fine, the third one is connected via a dvi -> mini display port active adapter.
With no drivers installed and/or in safe mode all the monitors boot up...
Hey guys (and gals) having a little issue here. I installed Catalyst 13.10 beta 2 drivers today in hopes of it fixing my fps drop and stuttering issues with Battlefield 4, but when I got the drivers installed one of my monitors won't turn on anymore.
I have 3 monitors that are all the exact...
Thanks for the replies guys! It was kinda what I thought too, a bad card. The reason why I didn't check the cards at first was because the artifacting was only occurring during the CPU portions of all the benchmarks, the graphics tests themselves all ran fine except for that so it threw me off a...
So yesterday I got done putting together my new rig and I'm experiencing some weird artifacts. They appear on CPU tests 1 & 2 on 3D Mark 06, Physics & Combined test on 3D Mark 11, Vantage CPU Tests and it occurred once on BC2 when I went to do game testing.
Specs: (Blue bolded Items were...
I always get crazy ideas every time I browse Anand and [H] lol. I'm going to order IX in a week or two. Want to see how the H100 performs compared to my NH-D14 first. Hoping it performs as good or better, going to LOVE having all the space back in my case!
So since I'll be running the IX with...
Well I figured if the stock stuff is good to just leave it instead of having to clean it all off, but I can't find any info on exactly what paste they use on the H100. I like the NT-H1 due to it not having any cure time.
The IX looks pretty interesting, but doubt I'd have the balls to let my...
Hey guys,
Doing some upgrades to my rig tomorrow, one of which is the Corsair H100 to replace my Noctua NH-D14. Is the TIM that comes on the H100 from the factory any good or should I remove it and put my NT-H1 TIM in its place? Will be using the 2 stock fans with the H100 for now until I do...
Hey guys, I got my new pair of Powercolor 2GB 6950s a couple days ago and have been trying to do a little OCing with them. I did notice that in AB I have voltage control on GPU 1, but not GPU2 even though both of the boxes that allow voltage unlock are checked in the settings. I thought that AB...
That is NOT the stock cooler for the 2500K or the 2600K. I think the Tower Cooler was given to reviewers in case they wanted to use it for Overclocking, temp comparisons etc.
Stock cooler looks like this for both CPUs => http://forums.overclockers.co.uk/showpost.php?p=18597716&postcount=7
The temp jumping from 26C to 40C during idle can be explained by the intel speedstep option. Your clock and vcore will increase as you use your pc. With my 2500K it sits at around 28C when im doing absolutely nothing. When Im listening to music or on the internet the temp will go up a little...
I don't see that it was mentioned or asked by anyone else, but what is your ambient/room temp? If you're in a warm room idle will be higher of course. Also, why don't you run Intel Burn Test, AIDA64 Stability test or Prime95 to see what your load temps are? That would also help the members on...
Here's a good video that I recommend to a lot of people on how to apply thermal paste and what different methods there are, if you have a flat base heatsink that is.
http://www.youtube.com/watch?v=EyXLu1Ms-q4&feature=fvsr
I used the X method on my NH-D14, some like the blob and other the...
Nope, no clearance issues for me with the 212+ and the Ripjaws. Here's a couple pictures from my 212+ install where you can get an idea of how much room there is between fan and ram.
If you do happen to run into clearance issues with the 212+ or the NH-D14, you can always move the fan up...
I was thinking about getting a few of the Scythe Slipstream 110cfm fans =>http://www.newegg.com/Product/Produc...-060-_-Product Newegg has a volume discount on these so I was thinking about getting like 3/4 of them. 2 for Push/pull on the NH-D14 and then 1 as an exhaust right behind the Cooler...
I'm sure I can get lower temps, just gotta figure out what fans to use and whether to go with 2 push/ pull or 3 fan push/pull/pull config. Noise doesn't bother me too much since I game with a 5.1 headset.
I think they're about the same, with the NH-D14 being maybe .5/1 db louder than the 212+ due to having 2 fans, but both were super quiet in idle and while gaming. I have a profile set up for the noctua fans where they are around 900rpm idle and when cpu temp is above 40 theyll spin at 100% or...
Oh the install wasn't too bad. Took about 40 minutes or so since I had to take everything out and remove the motherboard to remove the 212+ bracket and attach the Noctua bracket, reapply thermal paste, etc.. Hardest part was trying to plug the 8 pin power connector & two fans in at the top of...
Mannn.... And here I thought getting to 5.1 was a good accomplishment with my 2500K and you're sitting at 5.5 lol. Great job on the Overclock! Oh and nice looking rig! :thumbsup:.
Out of curiosity what kind of voltage does your chip need to be stable at 5.0 or 5.1? Trying to get a rough...
I just want to see if i can get a stable 5.2/5.3 just to see what the chip is capable of, run some benchmarks and call it good. Would like to stay away from 1.5vcore, especially since I have LLC on Extreme
Right now I have it at 5GHz, 1.37 set in BIOS, HW Monitor Pro shows a max of 1.39 & have...
I changed out the Cooler Master Hyper 212+ heatsink for the Noctua NH-D14. I got the NH-D14 in hopes of reaching 5-5.2GHz with reasonable temperatures. Below are Pics of install and size comparisons, temp results between the two are at the end.
Sorry for the quality of the pictures, they were...
Having an Issue with the Voltage Control/Adjustment in Afterburner. When I select GPU1 the Core Voltage (mv) slider bar is there and I can adjust the voltage, but when I switch over to GPU2 the bar is greyed out. I'm pretty sure that GPU2 is staying at stock voltage because when I tried out...
11.2 and new CAP it is. I was curious about this issue too. I expereience it every now and then with the 4890 CF I have now, but that may just be due to old drivers or something.
So I bought 2 6870s that should be here mid next week and was wondering what drivers you guys recommend for crossfire with BC2? On my 4890s I had to run 10.5a to get crossfire to work so im not sure if this problem carried over into the 6 series or not .
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.