see title:
games like Battlefield or general:ZH doesn't have 1280x1024 as a resolution that i can pick
in NFS most wanted, i have 1280X1024
I really want 1280X1024 in generals and battlefield.. I know the card can handle it when i still had my crt.
site used to be called pimprig. never really went to them for cooling news so I don't know how trustworthy their tests are..
shows the NH-u9 which uses a 92mm fan beating the Big typhoon by 8C load!! the 120mm version beats the BT by 10.
Text
hey guys. My problem is whenever i try to open generals or zero hour, it says i dont' have directx installed even though i do. Battlefield 1942 and my other games run properly so i don't get whats going on.
friends computer:
asus p4c800-e deluxe
2.8ghz prescott
After moving his stuff over to this new case, the computer got really laggy. After a reformat and clean install, the system just freezes during windows load screen (the sliding bar). He installed it on another hdd and it loads a little...
must-haves:
pci/agp lock
sata raid
~90-100 $$$
prescott support w/ 865PE or 875
abit aI7
abit is7
soltek-865PRO2-FGR - anybody know if it supports prescotts and has a pci/agp lock, has a lot for features for 90 bucks.
thx for help
found an old PSU that doesn't have a -5v(pin #18) wire on the ATX connector.
will this kill my hardware?
planning to use it for a computer made of spare parts
bad_pool_caller
what does that mean? It happens everytime winamp starts to make strange beep noises and i close it.
Could it be that there's something wrong with my onboard sound?
decided to put a diamond monster fusion card i had laying around to power a 2nd monitor. When i put it in, windows fails to load. My controller card will detect my hdds, then it brings up the part where it shows the irqs, then it just freezes. I've tried all the slots adn another video card; no...
my bios keeps reseting itself. i foudn out that if i uplug my computer and plug it back in to start it up, it resets. it even resets when i leave my computer on overnight. tried putting in a new battery but it doesn't help
help me!!!
BTW its a on another mobo, not the ones in my sig
Anybody every heard of this thing?
From what i;ve read, you're suppose to download the games off the server and play them?
offical specs:
Custom OS running Windows XP kernel
3.0GHz processor
256MB DDR RAM
Nvidia video card
Intel motherboard
Dolby Digital 7.1 surround sound
100GB+ internal...
after 2 months of trying to get the card to work. i finally decided to try it one more time before throwing it out. When i put it in it finally worked and i was so happy.
now the extremely bad part. artifacts started showing up when xp begins to load, so i checked to see if teh HS/Fan was work...
ok.. the summer heat was really getting to my geforce2 gts. so i decided to take it out and put some AS3 on it. I followed the instructions on the site and put the HS back on. Push the pow button. NOTHING. inspected the card. checked to see if it was seated right. Still no post.
Can somebody...
my cpu will be at 45 on load and idle@ 40, but after i put it on standby and restart it back up right away, my idle temp in mobo monitor just start to drop until its like 2-4 degrees above ambient idle. but after like prime95 the temp rises back up to 45 again.. Why does it do this? does standby...
What has the same perforance level as a voodoo3 3000 nowadays? Is it good enough to run modern/old games? I'm building a computer for little brother. Wondering if I should use this card or buy a new one (the money has to come out of my pocket :Disgust;).
i have a diamond monster fusion pci card that i wanna use for a 2nd monitor. it has a hs that seems to be glued to the chip and it runs too hot for my liking so i wanna put my own. please help
y will my cpu run at 1.207ghz: (142x8.5) but not at 1.206ghz: (134 x9)?? it runs unstable with a multi higher than 8.5x. does it not like a multiplier higher than 8.5? bumbing the voltage up doesn't work either
mobo monitor and my bios is showing that my 12v rail is at 12.78v. mobo is a Iwill k266 /w kt133a nb chip. is this some sort of error and if it IS at 12.78v, will this cause problems with my hardware?
friend is having problems with his comp
its a tbird 1.1ghz 100x11 on a asus a7m266 mobo. he bought a new stick of 2100 ram and tried to push it to 133. comp froze and he restarted it. usually his bios resets it self and starts up clean but this time it didn;t. so i told to clear cmos manually...
Hey people. long time viewer, first post. ok. I have a 1 ghz (7.5x133) unlocked AXIA tbird on a Iwill k266. The farthest i can push my multipler is 8.5. anything above that and games like Bf1942 and CnC generals will load but once the actual game starts, it exits and goes back to windows...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.