Recent content by ZombieJesus

Try installing new videocard drivers or reinstall existing ones if they are up to date. Other details about your system could be useful.. is your vidcard or cpu overclocked, what kind of components, what operating system do you use...

I have had an antec neo HE and an antec phantom die on me after only a few months of use.. antec powersupplies seem very flakey, I have never had power supplies fail on me before and never since I switched to other companies. Try a highend enermax or corsair next time. (provided it is the...

So I have been running my rig just fine for several months strait with out shutting down and many months before that just fine. I power off for the night and oops no booting in the morning.... Im guessing the contraction from cooling has wrecked part of my motherboard.. intel quad core...

YES! I lapped both the core and the thermalright 120e and the results are aweseem. I am now running 3.3 Ghz on my B3 q6600 Well I am sure the engineers thought a concave shape would perform better it appears to have problems for alot of people including me. All my cores are 2-3...

running a bit over stock but temps didn't change much. I think i really do need to lap the sink and why not the core while im at it. didnt realise how bad the 120s could be

the difference is greatest under load with prime95 hitting all 4 cores. I'm getting 69,68,59,59 +- 1 degree on the cores got a thermalright 120e on top of it all

For a q6600 is a 10c difference between cores normal? two of my cores are 8-10 degrees hotter then the two other cores.....

Running an opteron 170 overclocked to 2.7 on an asus a8n32-sli deluxe. Vcore fluctuates often by .03v and rarely sits at the desired voltage is this normal? note that asus pc probe 2 is giving me this information. My power supply is an antec neo 550HE and all its voltage values seem normal.

i have to run 1.55 volts to be prime stable both cores themps at 47 c load

my opteron 170 on my asus a8n32-deluxe is awesome it overlocks beyond 2.8 at least core 1 does.... core zero failed a few hundred Mhz ago and refuses to perform anywhere near the performace of core 1 ..... is core 0 just a bum core or is it some other problem? temps are all under control...

Is there a way to set a CPU temperature at which the computer will shut down incase my pump fails or something? I cannot find such a option in the BIOS.

Wierd I guess when it displays ddr at 400 in the post its wrong, what cpu-z is reporting makes more sense. Any clue on the CPU Temperature limit function?

I am having trouble using the memory devider in the BIOS of the Asus A8N32-SLI Deluxe. It seems to allow Memory clock adjustment in increments of 200, 216, 233, 250 at the max When at 200 K8 to NB and full 10x multiplier with Mem set to 250 I get DDR 500 no problem When I raise K8 to NB...

Heh it ain't too bad I made sure all the intakes have filters on them

Using a 1977 Bonneville heatercore with shroud from dangerden and two 56 CFM fans should I use a push config or a pull config? The heatercore is attached flat against the top of my stacker 810 case venting through a cut out in the top. My case is all exhaust making a negative air...