Recent content by Xads

I am going to be recieving my new plextor burner today, and have never really installed in a system i've built more then the standard 2 IDE device cdrom/hardrive. I have the non raid kk266, would i just connect the burner to a middle connector of one of my IDE cables, and which middle...

I would but its already listed on E-bay(oops bad word) action is http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1235990899 BTW It was purchased from www.overclockwarehouse.com I made a typo when I posted the URL in the auction. It was guranteed at 1008mhz but I run it at 933 right...

I am currently running a p3 700e@933 on a CUSL2-C and have decided that Intel really has nothing else to offer for my current setup. The idea of buying a higher speed pentium 3 seems pointless since the platform is slowly dieing off. Anyways, I've decided to go AMD and have chosen the IWILL...

I found an interesting quirk about the CUSL2, no matter WHAT BIOS rev you are running. No matter WHAT you set the CPU voltage to, it doesn't take effect until a complete POST cycle completes, that is, until your OS starts booting. I've got a dual-boot Windows 2000/ME system, and I had a major...

I have mushkin rev2 ram, what settings in the bios of an asus CUSl2 do I need to set to set it to Cas2.

Heh, funny thing is just yesterday I overclocked my 700e to 980mhz on my CUSL2 my first overclock:)When its booting up as a 466e its just in safety mode, to ensure a safe boot, so you can restore your original settings or try again. Your theory on how to do it is exactly correct and your doing...

Ok, a little success I now have it at 980mhz@1.8volts where to go from here? I tried for 1008mhz at 1.85 volts and it was a no go.

Ok, being more specific it's guranteed at a gig at 1.8volts also, im using a pal35t with artic silver. Can my mushkin ram be the problem i thought it could handle the 144mhz fsb fine its rev.2 I have yet to get it to post at 1008mhz it just hangs and boots up in safe mode. Im assuming that...

Also am I going at overclocking this right, with the way it set the fsb ratio, or not. I want to make sure Im doing it right before i start uping voltages.

Ok, I built my first computer without any problems, and have it at 933mhz at the moment. The hitch is that its guarenteed at 1008mhz, but im having trouble getting it to boot. The computer consists of an asus CUSL2, Mushkin rev.2 pc133, and Annahilator2. Im still on the original bios that came...

NT