Recent content by wcladley

  1. W

    TSA Screening Procedures for Android Tablets, iPad, and other small electronics

    I was reading that tablet pcs and ipads no longer have to be removed from cases when going through xrays at security checkpoints. Can anyone confirm this from personal experience? I am taking a group on an overseas trip and there will likely be all manner of mobile devices (not including the...
  2. W

    Thoughts on Acer Iconia A500 Screen

    I just purchased the A500 this week and have been it using for a few days. While many reviews praise the screen, I find it to be a bit pixelated. This is not due to the grid issue, as I actually cannot notice that when the machine is on, but rather images don't look as sharp as on some of my...
  3. W

    P8P67 Pro B3 - USB Issue

    Ok, bankster55, I tried the TPU switch and have achieved results similar to those you mention in your post above. I am noticing, however, that now system goes through a couple reboots every time I start it up. When it eventually does post, things seem to be stable and the USB problem has not...
  4. W

    P8P67 Pro B3 - USB Issue

    Thanks. I will try this shortly and let you know how it goes.
  5. W

    P8P67 Pro B3 - USB Issue

    Thanks bankster55. Excuse the ignorance of this follow up, but should I make StriperMike's adjustments and then turn the TPU switch on, or should I turn on TPU, have the board find a stable baseline, and then make these adjustments? I am first time builder so I am at this point slowly learning...
  6. W

    P8P67 Pro B3 - USB Issue

    I just wanted to chime in and say that I am having the exact same problem as StriperMike on the new B3 board (although I was having it on the B2 board as well): Config is as follows: Intel Core i7 2600K (stock clocks) P8P67 Pro (BIOS 1502) 16GB of G.Skill Ripjaws (F3-10666CL9D-8GBRL,1333 MHz)...
  7. W

    Problems with 2600K/Asus P8P67 Pro Build

    Well, I received and installed the new supported memory a few days ago. Things have been stable since that point. No more cold boot issues, and no crashes to speak of thus far. I have tested the system with a few resource-intensive games and 3DMark11. This level of stability has been maintained...
  8. W

    Problems with 2600K/Asus P8P67 Pro Build

    I updated the BIOS simply out of curiosity and the fact that 1003 seemed to offer some new features. This was a definite error in retrospect. Specs on the memory are: 667 MHz (odd because it was meant to be 1333 MHz), 1.5 volt, turns out that is was not on the approved list. I tried clearing the...
  9. W

    Problems with 2600K/Asus P8P67 Pro Build

    Hello, I am a first time builder, having some issues with my first build. I am trying to determine if the problems are related to the P8P67 Pro, or if I have simply done something wrong: Specs are as follows: Intel Core i7 2600K (stock clocks) P8P67 Pro 2GB PNY Ram (waiting on 16GB of...