Recent content by vortex240

sanius if it says 12 then 1unit is masked becuase there are 16 total Now follow Cdubneeddeal's directions and you will be able to get the 4 pipes unlocked When you click customize a table will pop up, the first 4 rows will have 3 checkmarks next to them WHICH EVER OF THOSE FIRST 4...

go for the bfg 6800oc 256bit rigth from the box 350core, lifetime warranty and low price I have unlocked 16 pipes, the 6th vertex shader is broken but it makes almost no difference, i run it at 385core 885 memory. they oc great they come with 2.2 sumsung memory so most run 850 easy all...

Yeah thats what I though too but when I plug them in like I described in my original post the rpm would go max...? How is that possible and the manula and their website also mentions rpm control. weird

Hey Ferm My psu is well within spec as far as the rails go +12 = 12.256 +3.3 = 3.31 +5 = 4.98, even under heavy load. However the rpm control thing still pisses me off. The psu is for both amd and intel. I opened it up replaced the back fan with a faster one but because of the rpm monitor...

Thanks amdskip for the reply. Well I plugged the fan into a regular pwr_fan monitor on the mb and it shows the prm, doesnt' control it however. I think that replacing the fan is the only way to go but I need a 3 pin fan that shows the rpm as well because the stupid thing has a circuit that...

I bought a enermax eg425p-ve sfm powersupply, it works great but it has a 3pin (but only 2 wires)connector that should be connected to the motherboard and I have a asus a7v333. This connector is supposed to provide rpm for mb to monitor and shut it off or adjust the rpm. My mb has only a 2pin...

dlogic thanks for the info, I did check out the forums there and there was a sticky with a link where someone said that 1016 is the only bios to use and to only run it at 12.5 x 166fsb ( http://forums.pcper.com/showthread.php?s=&postid=2059968 ) , they also mention that the chance of it...

Hi myocardia Thanks for a quick reply. The offical cpu support page (asus) says that bartons are not supported on this motherboard until the rev2.0. I have confirmed this by checking what some msg boards and no one has been able to get them to run with the regular desktop bartons. My athlon is...

Hi I would like to find out if a mobile 2500 would work an a asus a7v333. This motherboard (rev 1.04 and 1.01) dont support the 333. Is there a way to run the mobile on it at 266 and still reach 2.3g+ speeds. Currntly I run a palomino 1800 at 2000 (10 x 166fsb @ 1.75v) speeds and think its...