Recent content by tim500739

between the upper and lower chamber where the black sliding cover is I slid the black cover all the way back and enlarged the hole to match almost lines up perfectly with the fan intake on the second 8800 . all the power wires I re routed along the right side ( trimmed partition in lower...

You will need an 8 pin extension cable @ frozen cpu . OR you may be able to route it straight up the center but it gest close to the spp( south bridge) 12" extension worked great for me

i have a p180 with 2 8800 gtxs its tight but it works . on a 680i mother board you dont even have to remove a drive cage if you are only using 1 8800 but.... if you mount drives in the upper cage you can only mount 1 instead of 2 or you can mount up to 4 drives in the lower drive cage.

forgot to mention zalmann 9500 points to rear case fan

I just built a system with a p180, 680i mobo, e 6700, zalman 9500at HSF 8800 gtx sli, silverstone zeus 850 to keep things cool: took lower chamber fan put on back exhaust @ med speed removed upper HD bay and put top case fan in front med speed(blowing into case) closed off top case hole put...

My board shipped with a foxconn protecter on the zif socket