Recent content by TERMIN

ok, finally got it to post by taking all the components out and putting only the video card, ram, and cpu in i put everything in and it is working properly now i don't know what the problem was in the first place thanks for all your help everyone!!! :)

yeah theyr'e plugged in... :) it was just working fine the other day (about more than a year since I built it) ok, hard drive just started making clicking noise of death right when i put it into the old computer to backup files....damn....this really sucks :( maxtor should be sending a...

PSU is fine all the fans spin up the light on the motherboard and video card turns on

ok, i checked the cpu....nothing burnt or anything, it looks fine i haven't added any expansion cards the computer just wouldn't do anything all of a sudden (the day before it was working fine) do i have to reapply thermal paste again now that i have removed the heatsink? (I think it was...

should i still get a video signal if i start without the processor (only video card plugged in, nothing else)?

no beeps when i start the computer hard drive spins up for a second, then nothing nothing shows up on monitor, no video signal monitor just stays in power-saving mode (off)

the heatsink has clips, it's fine because i've used the comp for a year without problems until now i will check the processor and heatsink.. when I remove it though, will i have to reapply thermal paste again?? If so, how do i remove the old thermal paste from the processor and the heatsink...

ok i checked the video card and it works fine in my gateway computer when i turn on the a7v133 computer with only the video card, i still get no signal how do i clear the cmos on the a7v133 there is no jumper, but there are two solder points how and what should i use to short them?? the hard...

ok i checked the video card and it works fine in my other computer when i turn on the computer with only the video card, i still get no signal how do i clear the cmos on the a7v133 there is no jumper, but there are two solder points how and what should i use to short them??

my computer was working fine yesterday, and today i turn it on and i hear only the hard drive spin up for a second, then it stops there is no video signal to my monitor either, it's all black I Can't even see the bios screen!! :( this sux i have an a7v133 800mhz t-bird no o/c geforce 2 mx...

my computer was working fine yesterday, and today i turn it on and i hear only the hard drive spin up for a second, then it stops there is no video signal to my monitor either, it's all black I Can't even see the bios screen!! :( this sux i have an a7v133 800mhz t-bird no o/c geforce 2 mx...

which best buy was this?

wow, good idea gsaldivar i'll try that and see if it works which input would i put it on on the receiver?? i have vcr, tape1, cd, LD, and tuner would it work on the LD(laserdisc)??

my receiver is all full, it doesn't have a dvd input is there any way i can connect my dvd to it to get sound from the speakers in my home theater system??

i got this same s-video selector at radio shack for $19.99 last week. It was marked 19.99 also. if i connect my DVD player to this thing, how do i let the sound come out through my home stereo system??? same thing with my vcr and digital cable... ??:confused:??