Thanks Zepper, I really appreciate it.
And maybe a fan in the top of my case won't make much difference; but after temperature probing the inside of my case (with it closed of course) I am definitely getting signifigantly higher temps in the central upper part of my case so some exhaust there...
I have a coolermaster centurion case and while it cools adequately I really want to improve upon it. The biggest way I can see to do that since I already have 120mm fans on the rear, side, and front, is to add an exhaust fan to the top of the case. I also want to improve the looks of the case...
Antec makes a dual fan dumby PCI slot *card* that does a pretty decent job. It has a speed adjustment on the back and it will move a decent amount of air. I have it 2 PCI slots below my 8800 GTS and with it turned to about 50% I see about 2C cooler temps. If I crank it up to 100% I can get...
I went through the entire vendor list on Thermalright's website and nobody has one in stock...arg. Oh and guys...please don't tear me apart wondering why I want an Ultra 120 Extreme like some people did to the other guy, it should be obvious :)
I have heard conflicting stories regarding the HTT, somewhere I heard that on this board it will be stable up to 1500, and in my admittedly limited experience that seems to be the case. And yes I have been using dual instances of Orthos Prime 95, dual Super Pi, and Memtest to check initial...
Here it is: 273x11 for 3.003ghz, 4xHT for a 1092 HT link, Vcore@1.3875 with Vcore offset enabled (actually pumping out 1.488v). My memory is running at 858mhz with 4-4-4-12-2T timings and set to DDR667. Temps are staying under 59 C.
I was having a hell of a time using a 12x muliplier to...
OK, I have 2.88ghz stable with a 12x multiplier and a bus speed of 240 and using 1.45 volts, not too bad I guess. My RAM timings are still 5-5-5-18 but RAM is now running at 480mhz (x2) which is a nice overclock, but it will not boot at this speed with the recommended 4-4-4-12 timings and I...
OK, anyone know what this error in Orthos Prime 95 means: 2:FATAL ERROR: Final result was 411FFFE8, expected: 86B106EB.
I don't think it is Temp related because my temps were just fine when it happened, it was about 2 mins in and I was running two instances of Prime 95, it will not reproduce...
Thanks for all the great info everyone. I am regretting going with the 65w model now, I was trying to decide which to go with and took some advice from someone on another forum :(
On the plus side I tried 10x multiplier and Bus speed of 290 and am stable through 30 mins of Prime95, however...
It is indeed socket AM2, and no I am not using stock CPU cooling. I am using a Zalman 9500, I wish I would have gotten a Scythe Ninja after reading through some forums, unfortunately I based my CPU cooler decision almost solely on Newegg reviewers :(
Also, what is the maximum temperature I...
I am using an Asus M2N32 SLI Deluxe board with 2 gigs of Corsair XMS2 memory.
I am currently at 2835mhz with a 315 bus speed, 9x multiplier, and a 3x HT. I have CPU voltage set to 1.3875 in the BIOS but I get actual readings of 1.44 volts using Asus PC Probe and CPU-Z, memory voltage is set...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.