Recent content by SuperDune

i managed to get my P4 2.0 @2.667 (133fsb)using asusp4s533 at default Vcore up and running but it crash sandra at about 5minutes. Then i bring up the Vcore to 1.525 (.025 increase) and now it is very stable with no problem.

No, it is not the Window protection error- cannot init NDIS.vxd. I hit with that problems and it cannot o/c from 2.2 onwards. If he can o/c to 2.5 and is OK, this should not be the problem. I am having a P4 2.0A also. O/c to 2.67 (133 fsb, all auto, vcore 1.525 only :) ), running sandra cpu...

Is it really true that P4 doesn't have arithmetic unit?? anyone?

Hi, I just brought a ThermalTake volcano 7+ so as to bring my 2.0A @2.667 temp down. Problem statement: How to remove the retail hsf? Contraints : *this may sound stupid* my mb is screwed onto the chasis and CANNOT BE REMOVED ANYMORE. the screw is struck!! is there anymore hsf out there that...

When my CPU (P4 2.0A@2.667, Vcore 1.55, asus p4s533) is running at full load, i notice that the CPU fan is running from 2343 rpm to 2260rpm and dropping. The higher the temp, the slow the cpu fan....why??!!! i thought it should be the opposite. i am using retail hsf from intel. asus p4s533 mb...

sorry forget to add mb my mb is asus P4S533. kingston PC2700 256m DDR GF4 MX 440 64M ATX 350W with 4 fans

P4 2.0A @2.67 133fsb Vcore 1.6 (probe show 1.65V), able to boot up using default but 100% cpu crash game. retail hsf.

Anyone know which batch of P4 is considered a better one. There has been a few thread talking about the 63X and 68X thing. Anyone?

I am using the retail HSF. The idle temp @2000 is 40C and idle temp @2667 is STILL 40C. Take about 5s to bring down 1C (from 100% cpu to minimum load). Actually thought of changing the thermal pad with AS.....can't seem to get the HSF off, LOL.

woohoo!! overclocked to 2.66 with DEFAULT voltage. But when i play WarCraft III, it crash and temp go to 48C from 40C. Play again and it happen again. Go to Bios, change Vcore to 1.6V and restart....and it never crash anymore!! :) This CPU is cool!!! The final stat: P4 2000A @ 2667 Vcore...

80G new hdd ATA ??? 18 old ibm hdd ATA 33?? 66?? If you connect you hdd (master/slave) via a common cable, if your new hdd is ATA 133, the transfer speed will follow the lower one?? I think you can copy all files from you 18G to your 80G and remove the ibm hdd to see if there is anymore problem.

hmmmm.....i thought there is a certain limit to how high you can o/c your CPU. if you have a 1.6G, if you can o/c 50%, you can get to 2.4G. if you have a 1.8G, if you can o/c 50%, you can get to 2.7G??? the higher you base cpu speed, the higher you can o/c to ??? no?

i have seen quite a number of o/c using asus mb (glad that i brought an asus instead of MSI). If i set everything in bios...EVERYTHING to AUTO for my voltage etc etc, will the mb increase everything for me according to what i set for the fsb?? default vcore is 1.5v, will m/b increase AUTO to a...

another thing, Intel website stated that P4 2.0A max temp is 68C. Does that means that >68C == burnt chip??

I did not see anyone overclocking P4 2.0A. I have a P4 2.0A, Asus P4S533 mb, kingston PC2700 DDR 256MB. Asus Probe shows 40C at idle (100mhz fsb/33mhz) I wanted to overclock it to 2.66G by just increasing fsb to 133/33. leaving the rest like voltage the same. Will that work?? anyone tried...