Recent content by suklee

My 6x 1060 rig does ~20Mh each card = 120Mh total

Finally got all my parts - went with the Phanteks evolv mATX, but the length of the GPU is proving problematic... -Can’t mount the fans outside or the front cover won’t fit -Bottom fan wont fit between GPU and radiator Could I just use a single fan on this front radiator?

I saw the Air 540 in person, very nice case but too bulky for my space. I need to stick to matx or mid-tower ATX .. Define S is roughly the same size as my Carbide 500R, which is OK but would like to downsize, if possible. I'm leaning towards the Evolv mATX case and then see what I can do with...

If it can fit everything, I'd like to to go mATX: Phanteks Evolv mATX with TG + mATX ROG 270G motherboard. worried about clearance between GPU and front radiator. My 1080Ti is 298mm long while the case can accommodate maximum GPU of 319mm. That's only 2cm of clearance. Is that too little? These...

Thanks, that Nano S sure looks cool! Don't need to go as small as ITX but I'll check it out. I've been eyeing the Phanteks Evolv mATX with TG paired with the mATX ROG 270G motherboard, then I'll need to get the ekwb parts. It's all adding up! :)

My Poseidon 1080 Ti came in and I need to build the rest of my rig.. thinking of a 7700k and 32GB of Gkill DDR4. Motherboard will be Asus, was considering the Maximus IX Extreme; For the case I prefer a mid-tower such as Corsair 460 RGB - can I go even smaller while water cooling my 7700k +...

Well it's already on the way so need to make the best of it :D I'm just waiting til those new motherboards come out, yet to decide on a case. Will check out XSPC as well, thanks for the recommendation!

I'm about to join the club.. Ordered an Asus 1080 Ti Poseidon, originally as an upgrade to my 1070 but upgrade replacement bug hit, suddenly I want to replace the rest of my rig and do a whole new water cooling set up with ekwb. :D The new rig will be paired with an Asus 34" PG348Q

Was wondering about that, with the mid tower case the custom configurator spat out the slim line - Whereas in the fatter cube (Air 540) there was enough space for 2 radiators, one at the top and one at front (non slim). I really like the Air 540, except the width is a bit too wide to fit on my...

Thanks, will check him out on Youtube. Seeing how tempered glass & RGB is all the rage now I'm considering the Corsair 460X case paired with this ROG Rampage VI mobo (EATX). The In Win 909 looks really nice but slightly too large for me. Do I need anything else? Edit: these 2 are my front...

Doing a build in need of some recommendations: Splurged on an Asus 34" PG348Q and Poseidon 1080 Ti. Was originally considering the Corsair Air 540 or Fractal Node 804 but I think I'll stick to a tower case, something shorter than my Carbide 500R, with tempered glass. This one looks pretty good...

Hey, thanks for the recommendations. I'm not set on uATX, I could go for smaller mini ITX if it will help me fit in more radiators and fans. According to the Air 240 specs, 29cm (11.4 inch) is the longest card I can fit, and the Poseidon is 29.8cm (11.73) inches long! I guess I have to scratch...

I'm looking at the following build and want to try water cooling - can I water cool my CPU and the GPU in a small case such as this one? http://www.corsair.com/en-gb/carbide-series-air-240-high-airflow-micro-atx-and-mini-itx-pc-case Other parts...

1. Any opinions of ethermine vs ethpool? I've read anyone with over 1Gh should use Ethpool? I have one address with 1Gh and another with 3Gh - should I move to Ethpool? Should I combine the hashing power - will I get better results? (don't know how I would track the contribution of shares...

Hmm, for some reason three of the four rigs now work with 6 cards. Did I reverse-jinx myself? Each RX470 doing ~24.5 Mh/s = ~147Mh per rig Edit: rig 2 still has the BSOD with 6th card attached rig 6 won't POST with single GPU connected via primary PCI-e slot - onboard HDMI is ok, as soon as I...