Recent content by SteveLee281

This is the stock HS fan with artic silver

I have the 2.4 overclocked to a 2.7 on a Abit BH7. Is it normal for the CPU Temp to jump from 38-39 idle to 59-63 under full load? I know the BH7 is suppose to display temps that are higher than actual, but that huge difference between load temp and idle temp worries me.

I tried 160FSB with +10% to the vCore and 2.75V for the memory, BIOS temp reads 51C for CPU temp. However, it will not get past the splash screen in windows XP before I get a blue screen. This is with memory at 1:1 ratio and PCI bus locked at 33Mhz. Also tried 156FSB with +10% to the VCore...

Sorry I didn't mention this earlier, but when I set the FSB to 156, I changed the memory ratio to 1:1. I only have one 512MB stick of the True-X 3000. The vCore numbers I lsted are from the winbond monitoring program. Here's what it says on the Channelwell CWT-420ATX12 power supply: +3.3V...

HI, I'm running the 2.4B with the stock intel heasink and fan on the BH7 motherboard. I'm using a stick of Kingston Hyper-X 3000 DDR RAM. So far, I've been only able to get the FSB to 150Mhz with a vCore of 1.54 (+5%). The memory voltage is at 2.65 and I've locked the PCI bus and set the...