Recent content by SplinterDB

The really stupid part is that if you don't fear the car you have no business being in it.

I don't have a burner right now i can get a hold of one but is there another way like off a zip?

What is the best way to check if the RAM is not up to par. It does not seem to handle the bus it is rated for. Fails PRIME 95 quick at 333 FSB but at at 266 FSB it runs for hours and hours, even with the CPU overclocked (or without). I have the FSB at 333 (1.6 duron rated 266) running at...

148 in a 96 Z28 160 (speedo pinned) RPM 4500 did 5250 RPM ~175mph in a modified 280Z.

HSF came off, with the CPU STILL ATTACHED TO IT. Meaning it got yanked out while the ZIF socket was in the locked position. Screamed. Saw bent pins. Screamed. ROFL. Not at you I have been there.

ENFP

128 I thought that the "average" IQ was rate on a standard deviation of 15 on either side of 100 the central mean. The stupid thing is my guidance counselor ask if i was cheating because my grades were too high for my IQ, in the same respect she couldn't figure out my GPA; which was 3.41...

What he said Twice!! :shocked: :confused: :beer:

bump

No. The IDE will run at the slowest speed that is hooked up to it. The cd rom runs much slower than your HD. Think of it as water( info) runing through a smaller piper to a bigger one. it can only go as fast as the smaller pipe. the power gives the same voltage to all units (4 pin).

Can i do them all at once or 1 by 1? I am using XP (don't Shoot!). I changed the drive letter to the one that i want to be drive e:, but it still has problems.

You want the more advanced drive to be the master. Attach the grey cords to the slot marked SATA2 or IDE2. Don't hook up your cd or rw to the Hard drive it will slow it down.

Have you set the jumpers for your FSB speed?

CD rom is in slave and games only load on DVD-Rom they were installed with. Is this a master/slave issue or a targeting issue?

It looks like the time to get a PCI\USB adapter you can get a extra 4 ports for $25-35.