Recent content by SniperMerc

Google is your friend. http://www.chromewireties.com/

Actually I was thinking more of this version, http://www.newegg.com/Product/Product.asp?Item=N82E16811133155 , it doesn't have the big 250 mm fan but it is 20 bucks cheaper than the one with it. I did just notice the deal with MIR on the black steel version brings it down to $109, which I...

I just built my new system with that case, and yes its got pleny of room. I would suggest getting the Aluminum version if you like to do a lot of tweaking with your system, it's tons lighter. And I have built systems with both and think the extra 30-40 bucks to have the lighter case is worth it...

6800 GT cards do run hot, their designed with that in mind, 64 C at idle is about normal for that card and under load can get upwards of 85 C. If you decide to go with aftermarket cooling then your best bet is going to be either the Zalman VF-700 or VF-900 GPU coolers.

From everything I've seen you post so far, it's all starting to center on your ram, could be a bad or degrading module that is the problem. Try 3-3-3-8 on mem timings and see if it stabilizes. Also something of note, on NF2 Ultra chipsets, there is a weird but noteable quirk when the TRAS...

Sience you allready have heat spreaders on your ram, I wouldn't hesitate to pump some more voltage to them, 2.7-2.9 should be easily doable. Definately bump that cpu voltage up, XP's can handle a good ammount, I find that with my setup 1.8 Vcore keeps me stable, if a bit warm @ 12.5x200 for...

I was able to get into windows at 2.7 ghz with mine, at 2.0 Vcore but I would need to remove my 6800 GT to do it lol, also, I consistantly could run benches at 2.6 ghz but again without my 6800 GT in system, damn card pulls a lot of amps, but I definately wouldn't call it stable at 2.6. BTW...

Best thing I've found for cleaning off a cpu. Charcoal Lighter Fluid.

I'm actually kinda suprised its taking that much voltage to stabilize it in the first place, the 35 watt chips were a bit better than the 45 watt like I have. One thing to remember is that the stock fsb on those chips is only 133 so even at 200 mhz you still get a 67 mhz oc on the fsb. At...

Bump the CPU V to 1.75. and if you have an adjustment for the Northbridge voltage, give it a bump too. I have a mobile 45 watt 2600+ @ 200x11.5 for 2500 mhz and been running it at 1.75 or 1.8 during the last two years (depending on what configuration ive been running) using a Zalman CNPS 7000...

BASTAGE!!!! Btw, the guy that posted above about using AS 5 and then super glue on the corners, this trick does work but I have found it is really easy to knock the sink off using that method, better off just hitting the whole surface of the sink with super glue. Last time I was over at a...

BTW im going to have to kill you for getting that FX 60 :P Got any parts left over for a poor gamer? ;)

Put em on ignore didja lol. Hell I can't even stand to read freds BS these days.

edit nm, you were looking for black, i missed that

Because I gave him the 50 cent way to fix it, you just gave him the $30 way to fix it, and as ironic pointed out, you can use superglue remover to take it off.