Recent content by skubik

I currently have a gef3 ti500 @ 260/560 and about 9600 3dmarks (145fsb/1800+@1670) I'm considering either a cheap TI4600, an Abit OTES ti4200 or a 9500 pro radeon since the bios can be modified to overclock now, however the results i've seen thusfar from overclocked 9500 pro's hasn't been so...

I know NForce2 was raping via prior to the 4.40 AGP driver release for the 333/400 KT chipsets, is VIA back on par with the driver enhancements or is nforce2 still *THE* platform I should be going after? (kt266a right now, time to upgrade)

TTT

I'm working with a board with the new promise raid setup that uses 2 SATA and 1 Parallel interfaces but i'm in need of raid0 with 2 parallel devices, so the only option is to find an inexpensive SATA-->PARALLEL adapter, I found one on pricewatch made by 3ware for 55$ but that's sooo expensive...

It seems now that SATA is common onboard, there's only one RAID capable parallel port, what are you supposed to do? run both drives on one chain?! that SUCKS!

Well, I'm very close to buying a P4S8X and 2.53B and just using the micron pc2100 2x256 that runs 150fsb no problem @ max timings in it, but now after reading thusfar it's not worth the money to upgrade (Shuttle AK35GT/R w/ 1800+ AMD @ 1725mhz currently), guess we just wait for intel's new...

I use the GA-8IEXP at work for installations, I used to hate gigabyte, now I only hate everything *BUT* their intel boards

I'm running a Shuttle AK35GT/R w/ 1800+ @ 1725mhz/150fsb right now but i'm looking to upgrade again this week. I'm going with the 2.53B for certain but i'm a bit unsure of the mobo, I wanted 845E (GA-8IEXP) but have changed my tune to Asus P4S8X since it seems to perform well and has 8X AGP...

after doing some reading i learned i could use RRAS to do the routing and leave the subnets separate, anybody familiar?

OK OK, this has been a pain to try to figure out but maybe you guys can shed some light. Here's the scenerio: Our office, 25 or so nodes/client pcs, 1 Windows2000 PDC, all running TCP/IP with a subnet of 192.168.1.x netmask of 255.255.255.0, we had our DSL router on 192.168.1.254 but...

Ok, I'm using an intel chassis with an Intel STL2 server motherboard (dual p3), a SRCU31L pci intel scsi raid card connected to 3 18gb IBM scsi drives in a hot swap enclosure, id'd according to bay number (0,1,2), all firmwares are up to date as well as windows drivers. I have the drives in a...