Recent content by SiiRuHs

okay I pulled out one of the sticks of memory and now it says "setupdd.sys could not be loaded" any idea what that is? this disk has worked before..

My comp freezes up every time it gets to the part where winXP says it's loading the 'kernal debugger dll' tried 2 cdroms and it gets by that step fine in a different comp so it's not the disk... suggestions? epox8kha+ k7xp1600 2x512meg PC2100 Nanya ram (suspecting maybe this) psu is 465watt and...

sounds like your mobo is dead I had similar problems with my first 2 epox boards, third one is in the mail my boards locked at either FF or C1 but never made it further on the second board, a chip physically popped and it wasn't because of the PSU (ran it in another comp for 2 days, 5 on/off...

hey that works too, sweet thx

definately parallel. I wouldn't worry about the combined 3/8 x 2 limiting your flow rate too much, the biggest factor I've found is the material the water block is made of assuming everything else is at least decent (radiator/pump). the performance diffs you get between most water cooled systems...

remove the power supply from the case, take a short length of wire stripped at both ends and connect pins 8 and 14 on the main system cable (if you hold the connector facing you with the cliping side on the right and the flat side on the left, pin 8 is 3rd pin from top left, 14 is 4th pin down...

I was just wondering if anyone else has had problems with their epox 8KHA+ mobo seeing as how mine was rather... erm.. flashy? Hooked it all up, powered on, nothing. Checked all the connections, everything looked good so I hit the power again. *pop* The little chip between the chipset fan header...

I've got a samsung 955df and I'm pretty happy with it refresh rate isn't great at high res but the clearity and colour on it is great. I find that the main reason sony monitors look so good is their darker frame, makes the colours brighter and more vibrant but side by side the diff is minor. I...

oops forgot to contribute my own exp. seen 2 linksys cards that didn't like anything that wasn't default (10/100BT fast ethernet, version 4 and one that was made by some company linksys bought out), a no namer (forgot) that works fine slightly OC'd but don't know the limit and a dlink that also...

I've noticed a lot of NICs under win2k/xp are really picky about being OC'd and cause a lot of instability. I'm wondering if people could post their own results/experiences or any info they have that might be handy? specifically which brands seem to be the best at taking increased PCI clock...

well I don't know how much work you want to put in but I found an old heat exchanger unit at an auto wrecker for $5 canadian. Made of copper and a much better design than a standard reduct radiator for the waterblock I went to a raw metal retailer, got some 1/4" copper, a propane torch and then...