Recent content by SAngeli

Hi ptr, you have my same exact hardware. I just received today my VF700CU or the NB47J. Could I please have your temperature readings of both the mobo chipset and the videocard, and what PC Case you have so that I can see air circulation Once I will install everything I will post my...

* EDITED * I decided to put an end to my research and do what most of you did: Purchase the Zalman VF700Cu. If I am not satisfied, I will then see. Thank you anyway for all your help. Spiro

Hi vlad4, I was told by Thermalright that the XP-120 can only be mounted the opposite way you did. You did, instead, installed in my openion the right way so that also memory will benefit from the 120mm fan. Question: Did you have any trouble installing the XP-120 with regards to the left...

Hi Speedo, It looks like your solution is the way to go. Yes, the big fan is of big help to the N. Bridge Chipset. Luckely, instead of placing the big 120mm fan like you did, I have mine part of the case structure located at the botton of the case. So, just abut 10cm away from it. It should...

Hi Guys, I am almost there but need please your advice: This is exactely my case, with a bottom 120mm fan that blows 56CFM of fresh air. http://www.nexustek.nl/images/breeze_vside.gif I noticed that if I place the Zalman ZM-NB47J it received perfectly almost all the air the 120mm fan...

Hi, orlenfrost, you said: "I picked a spot on the base of the heat sync between the heat sync fins that was easily accessible to the probe and measured in the same spot each time." Did you place the probe between the fins at the bottom of the sink or under the sink between the chipset and...

Hi, I have an ASUS A8N-SLI Deluxe mbd and wish to replace the N/Bridge fan/heatsink (loude); many people have reported being loude. This is my computer case http://www.nexustek.nl/breeze.htm Nexustek Breeze, with one large 120mm fan (I replaced with SilenX 56CFM) and a PSU with 120mm fan. So...