Recent content by samuelmorris

I'm using 1.35V CPU with the +100mV offset (I'm pretty sure 1.35's the standard). RAM is set at 800mhz unlinked. NB voltage is 1.39V as per instruction. Timings manually set to 5-5-5-12 as RAM indicates and 2.1V as memory is tested to comply with.

I read the guide, and following your instructions about the voltages I can get 1221mhz and 1300mhz FSB to POST, NOTHING in between will work at all, but 1300 isn't stable enough to boot windows. As I continually experience, this board seems to implement massive black spots where you can't POST...

PC6400 CAS5. It's only one stick of the usual two in the matched pair because one is faulty, but this behaviour really doesn't make sense even so.

The odd thing is I tried setting the multiplier down to 8 and it did boot with 1001 fsb, set the multi back to 9 and it still booted. Kept going and now i'm up to 1166 fsb with 9x multiplier. Very odd.

OK I've recently acquired this board and an E4300, but unfortunately one of the sticks of RAM I got was faulty, so I'm currently running 512MB single channel (ugh). For a laugh I decided to try overclocking anyway. I got to 1000mhz FSB (2250mhz CPU) and it seems stable, ran 3dmark and OCCT fine...