Recent content by Ryu

INFO If your doing dvd re-encodes then this program will let you use other computers over network to help speed up encoding.

do you have any ide hard drives connected? if you do that causes problems at least it did for me. disconnect any other hard drives other than the sata one when doing a fresh install.

anyone want to help out an old timer on this board with an invite? pm please.

anyone feeling generous?

I've had the opposite experience as LasombraB. I've had a netgear 8 port switch for 3 years now and run at least 2 gigs of data through it everyday and never had a problem. I also have a 5 port netgear in another room thats been going strong for a year or so. The only bad experience I've had...

As cool looking as the punch dagger is, I don't think most people will walk around with something like that all the time. For a more realistic solution try this for the flight type LINK And if your girl is looking for a fight try this LINK I have the asp baton 16" and its very concealable...

try this reg tweak and see if it helps, it worked for me. tweak!

if money is no object ibm x31 or t40p would be the best they both last about 4 hours. Check the link from anand link

I wasn't sure if the me102 worked correctly with the latest firmware (early may when i set everything up). But i knew that the me102 is basically the same thing as a wap11 so i used the linksys firmware. Everything works fine bridgiing the 2 me102 together. I don't do dhcp with the ap, but...

Im 99% sure that the mr314 will not work in wireless bridge mode with another ap. To my knowledge it doesn't even have a wireless bridging option. I bought one a while back to try the exact setup you have but it doesn't allow bridging, I even called their tech support and they were pretty much...

quick question, does ie 6 come installed by default now with sp3? please tell me no :)

i got another lemon to add to the collection p4 1.8a fp/batch l146b046 version a78297-001 pack date 12/27/01 i can't get this stable at 2.4 with 1.7 vcore using a ax-478 asnd as3 it runs fine a 2.214 ghz with 1.55 vcore though.

nice find, im tempted to get this so i can still use my old p3 550s. Here's what anand had to say about the board here

here's another vote for the intel nic. It may be true that there is no noticeable difference in speed among most nics, the real difference is in compatability. After using just about ever name brand nic here is what i found. Dlink 530 didn't work with my tyan trinity 400, netgear 311 didn't...

dukdukgoos, what i meant by "i haven't overclocked the card" was the memory is spec -4 so 1000/4=250*2=500 i think thats the equation. Anyways all i did was bump it up to the speed is should be at. edit: forgot to mention aopen has the coolbits registry hack on their website, which is what i...