Recent content by rs11

Ok will read it through more :)

Ok ill just trial and error , thanks for all your help I wouldn't have a clue with out it :)

Just used 180 BLCK - IMC - 1.14 and PCH 1.10 PLL-1.80 But the only part im unsure about is DRAM frequency it has not got 1333mhz anymore had one 1400 ish and 1600ish So im not sure the freq for the ram Any help will be great as always :)

Yeah just found that all EPU does is save power not bothered about it. I may try o/c abit more now i know how to test etc :)

Ran prime for 8 hours no errors also occt 2 hours no errors. CPU temp is around 50c on full load is that ok? Also i get EPU cannot launch under the current o/c settings please restart load defualts. I have never used this program so is it ok to ignore it? Thanks

Voltages - CPU Vcore - 1.23 VIN1 - 1.74 +3.3v - 3.38 +5 - 5.06 +12 - 11.60 VIN6 - 0.60 got these voltages from hw monitor Ill probably invest into a much better cooler eventually for higher but for now seems ok :)

This seems ok :) just overclocked it to 3.2 get max 67c on intel burn on max test so is this ok? I will run Prime to make sure

Thanks for that very helpful :) I know what Im looking for now

Just took a look in the bios i only have CPU PLL there and not CPU VTT? Also CPU PLL would not let me enter 1.675v as the min is 1.8v My RAM is DDR3 - 4gb and is 666mhz on CPU-z how would this setup in bios? Thanks for advice people.

MB- Asus P7P55-M. Then in bios says Vcore over voltage "auto" or between 0.01 to 0.63.

excellent help thanks all clear apart from Vcore where is that in bios i have Vcore over voltage max 0.63 min 0.01 in bios obviously that is not Vcore. Thanks.

thanks for reply , im unsure on all the voltages , like what i should use etc ? and i will put the multi back to auto?

Hello , Im new to overclocking been looking around at guides etc. However still confused! my spec : I5-750 processor 2.66ghz 8mb cache Asus P7P77M DDR3 motherboard Intel core i5/i7 standard cooling I brought a ac freezer pro 7 rev2 yesterday and fitted. I want to overclock my i5 to 3.2...