Recent content by rgf

I really don't like to pass on bad news, but in this case I will. I had the same setup as you did about 30 days ago and changed out the cpu to a 3.06 HT 533. WOW what an upgrade. However, I've tried upping the fsb between 134 - 150 and I had problems. The agp goes bad about 144-145, the usb...

If you are trying to setup raid with a dead bios it won't work. You will have to put a single hard drive on the 0 ide chanle and load windows and reboot. Hopefully, you will be able to get windows to load. If that doesn't work, boot to dos with a win98 bootdisk and reflash your bios. If...

yes, I used cpuz....nice little program, but it won't let you change anything....thanks for the replies... A year ago, I had a amd/via setup. It had all of the bells and whistles in the bios. You could tweak just about anything. It was an Award bios however. Amibios is OK, but it just...

Inside the amisetup menu it shows all of the new options when I enabled them via amibcp75 program. The only thing that I don't have are ram settings. So, if I were to overclock my system alittle, just maybe by altering the ram settings, I will be able to make my system more stable...... Rf37

I have an AMIBIOS. The setup screen says Amibios setup utility ver 3.31a. I've used a bios tool called Amibcp75 to reveal the hidden settings and I turned them all on just to what they were. The names of each item were not revealed by the program, but I was able to enable the settings...

Hello, I would like to edit some values; however, I don't know what program to use. I succeeded in unlocking 99% of my hidden bios features, except for one.......Hyperthreading.... I used a utility called " tmods biosmodv3". Next, I ran Intel's Hyperthreading technology readiness tool and it...

Hello, I would like to edit some values; however, I don't know what program to use. I succeeded in unlocking 99% of my hidden bios features, except for one.......Hyperthreading.... I used a utility called " tmods biosmodv3". Next, I ran Intel's Hyperthreading technology readiness tool...

I have a cpu frequency problem...please help. I have a Giga bite motherboard. 8IHXP Intell 850e chipset. Rev. 2. Intel 2.5 mhz processor (533 bus speed) Mother will not allow me to change the frequency. Settings are for the processor are as follows: 19 x 133.33 mhz (locked) not overclocked...

I'm currently using 11060391.pcr file with wpcredit/wpcreset. I'm trying to change register 75 (value is A2) to value 81. I've used A0 and A1. I've had no luck. Sandra sisoft 2001te stardard edition related to me that my Dlink pci card's latency is set too high. I can't change it in the...

I was wondering how do I change the pci latency? My Dlink 10/100 was reported by Sandra Sisoft as hogging the pci bus. The pci latency was too high. I've looked inside the bios and I couldn't find anything that could change the pci latency. I'm using the luckydaze bios rev KKR0515. I have...

I currently have an Athlon TB 1.2ghz @ 1.4ghz vcore is 1.65 in Iwill kk266R BIOS, but Sandra reads it as 1.73v. The cpu settings are 133 X 10.5. CPU temp is 97.2F/ 36.2C.. The mainboard temp is 77.7F / 25.4C. I'm using a Swiftech MC462 hsf and Enermax 431W ps. So far no problems.... rgf

I just received my Athlon 1.2 ghz 266fbs processor and an Iwill KK266-R motherboard today. Athlon 1.2 266mhz fbs A1200AMS3C AXIA0114VPAW 95487650554 1999 AMD Iwill KK266-R ver 1.2 What can I expect from the Athlon AXIA "9" retail? It came with a hsf w/ a pull tab that has some...

I was in the same boat you are in now. I would purchase an Iwill kk266-R motherboard and an Athlon 1.2 ghz/ 266mhz bus processor. You can get a good deal over at Newegg.com. Remmember, this board uses sdrm. Buy crucial or mushkin sdram. Go to mushkin.com and purchase 128 MB PC 133 rev 3...

Insane 3D, Did you get your motherboard at Newegg? RGF

I'm going to build a new system. I was thinking of the Iwill KK266-R. I would like to utilize the ram that I have in my old system. I currently have three Mushkin 128mb PC133 rev 3 sdram. Newegg has the board at $122. I would like to buy an AMD 1 GHZ processor, but I don't know which one...