Recent content by qiu

What happens if you set the bus speed to 100??? Try to cut/close the bridges... I think they describe this somewhere on tomshardware.com... do a search there.

Simply run the highest FSB: I'm running 143 FSB/MEM with generic RAM 2/2/2. It will run syncronously... + 143*7.5 is waaaaaay better than 11*100 in benchmarks... it's not the ram, it's the async FSB/MEM... ain't workin' too better above 112. That's why VIA set the mem only to sync above 124 or...

Keep it @ the maximum bus speed. Nice work :)

NO TROUBLES on NVidia Cards on W2k. But you may get a 1 FPS hit though :)

Overclock the MX & you'll get the same results :) I'm doing 2600 with a GF2/MX 235/212 form the default 175/166

Try to set to manual the DHCP service in control panel-Administration-services :D

keep your side panel off or get better case cooling (additional fans) Always best to strip the case off :) you can access things better & get lots of better cooling w/o spending anything. Here's my story: I bought 4 80mm fans to fit into my case, cut two holes in the top, yadda, yadda and I...

download the latest drivers for this graphic chipset from www.intel.com

I don't know... I guess the Mobo controls the fans, but only if they are plugged into fan headers on it. BTW: I almost fried my 1 Gig Athlon in standby mode with no fans on... so if you're on AMD's side better turn the thing off, or try it if you can RMA it.

try to get installers for the codecs... e/g do a search for the codec in google, dload it then installl it...

see first what's the highest CPU speed (default 100x increasing progressively the multiplier), then set the multiplier to 6x100 & check the highest bus speed that you can achieve... then calculate CPU speed/MaxFSB & set the multiplier. Notice that you may up the VIO voltage in BIOS to...

let's act AMD guys! site that's kissing intel's butt... www.rolotech.com http://www.rolotech.com/reviews/CPU/Intel/Pentium4_reviews/P4_original/P4articlep1.htm "Think of it this way - what would you rather have, a videocard that can give you 160+ fps in Quake3 with all the...

LAN stans for Local Area Network. So wake-on-lan stands for when you're getting NIC (network interface card atcivity) try to get something set like Wake-On-Ring if u have smthing like this.

SPD, I don't know for sure stands for a little chip that provides the mobo with the DIMM settings: eg CAS2 up to 133 It's better to have the RAM timings set manually, (not "by SPD", or AUTO)

Fresh reinstall everything... it'll help Maybe including an 1G Tbird AXIA oc-ed to 1.5 @default voltage ;-)???