Recent content by puppet

I have the Visiontek......bought it cause it is made in USA, in part. Lifetime warranty. Got this throgh a local shop for lees than an on-line price...$289. (at the time was $30 less) The 2D and 3D is very nice. I'm using the 23.11 drivers and it is vey...

I'd say it's the drivers....I have the same card and up untill recently would just run with 6.31 dets. Everything else would either produce some artifacts or locks. The latest 22.50 seem to be pretty stable for me so far. First new set of dets I've seen that actually look pretty good. We gotta...

I'd like to futher tweak my RDRAM settings with WPCredit on the i840 chipset. A lot has been done with this tool and SDRAM but there is not too much documentation with regard to RDRAM. I did find one setting that helped increase my memory performance as far as sandras' reference system is...

Since your revision is too low.........you might be able to run FCPGA coppermines using an adapter to lower the voltages closer to spec.... Older Asus p2b's need to do it this way.

A #10 sheet metal screw is what you want for thread size. Length should be at least 1/2 to 5/8". As for "grommets".......I use the ever handy faucet washers.....available @your local hardware store for about .10cents a piece.

Don't see why not. You will have to redrill and tap for the P2 hole pattern though.

Freezing usually does the trick. Leave it in there overnight. Don't forget to put a credit card between the bottom of the HS and the PCB where your prying. It's easy to cut a trace.

Xcorpeo I started a thread for you fellas in the "new" section about the PSU. I had a couple of questions about the backplane ......if you got that far. I'm still considering buying this case. If that backplane is in fact U2W .....and some of the other functions of the columbus ll...

Ya it was a Hot Deal...initially. Has about 13-14 pages of posts.

It was in Hot Deals......."Toshiba Magnia Server Chassis......" The tail end started to get more technically involed and the thought of it having been moved crossed my mind. Just don't know how to find it if that is the case. The was a lot of pertinent info in that thread.....hope he...

I'm looking for a particular thread that has vanished since last night.....at least I can't find it. It was here @1:00 CST : http://forums.anandtech.com/messageview.cfm?start=81&catid=40&threadid=441654 Now it's not. Has it been moved or deleted? The search turns over many stones but...

The 700e is the fastest........with the right components. Most hardware today can take the "out of spec" settings that the BX will inflict @133+. Up in this range though ...the BX is awesome.

You can also make use of a utility called "cacheman" to optimize memory usage. It works very well for me. Make sure that you do not have too much memeory allocated to AGP aperture settings. Check your systems BIOS and set this to 64 mb if it isn't already. Disabling start-up programs...

I use RS......works just as well for me. We had a discussion awhile back about this "drying out" story. If air can't get to it...I don't know how it could dry out. Every HS I've taken of with RS on it was still fresh.......months & months later. Once the air hits it.......sure it...

I'm using a Tekram U3W on a soyo ba6+3.....works reliably @155FSB (38 PCI clock).