Recent content by powerBar

Problems with 4GB Ram & DS3 Rev. 3.3 + Q6600, Bios F12 Is there anyone here that has the above configuration running or are there some issues with my configuration? I've upgraded my cpu from E4300 to Q6600 and started w/2GB RAM - the system worked great. Next I upgraded to 4x1GB and could...

;) yeah i know, i'm just giving it max volts my mobo allows me to select (1.55V) and the oc is more or less good enough to make a cpuz screenshot or "work" at idle. although i'd really like to have the cpu stable at 2.8GHz :) - any suggestions?

Just found this thread and it looks like my oc isn't that bad: A64 3000+, Venice CBBWE 0538BPCW MB: Asus K8N4-E Deluxe Stock aircooling This is what i get (prime stable) 1. Default vcore (1.4V) 2.5GHz, 250x10 2. vcore = 1.525 2.65GHz, 265x10 Anything higher than 2.65 isn't...

I've never used ntune for overclocking, just bios. But if you must oc from windows, you should try >ClockGen<. The PCI bus is lcoked automatically when you increase HTT through bios and in the latest BIOS (beta) version from asus, the PCI lock/frequency has been added to the settings...

MAx HTT update: So I tested how far i can go up with the HTT and i was really surprised that the board reached a max HTT of 330MHz! First i went up to 315x8 and no problem so I thought maybe I could reach my max oc with a lower multi and it worked. 1. 2520MHz = 315x8, HTTx2, Mem: 133 divider...

Sorry for not checking in earlier. My system is rock solid at this overclock - not a single BSOD or system freeze - and its up & running 24/7 @ 100% load for weeks without ANY problems. The temps are CPU/MB: 29C/25C idle and ~40C/32C @ 100% load with stock aircooling. When I was tweaking the...

Hi! I'm using the K8N4-E Deluxe with a A64 Venice. The overclock process was nice & easy and I could oc to 250x10 with default vcore (1.4V). With increased vcore (1.525V) I'm at 265x10 rock solid but I'm a litle limited with my low spec PSU regarding higher vcore. hope it helps. cheers...