Recent content by pouki67

@ Mk pt : ok i haven't well understand. You're right 4.1 or 4.2GHz is cool. Even with 4GHz I'm steel happy. Twelve cores at that frequency is overpower. Average 20/30 % from I7 5820 stock with his 15mo cache.

Just go down from 1.368v to 1.352v (cpuid software) and the system seem to be stable on 4ghz with the x5650. I've done a mistake in the previous post, i have an old NH-D12 not the 14 one. @ MK PT : The max temp you show under 60 degree is your max temp with Hyperthreading on ? If it is, there's...

@jforce 321 : Hi guys. I just read your posts and want to ad an information. I don't know why (i'm a noob) but the temps go way higher when coupled with high memory frequency. Under 1600mhz it's better for me. I have the same issue temps have 10 degree difference and it is the same cores than...

Thank you for the fast reply. No it isn't thottling. I reach 85 degree with prime95 and have meant that it will go higher with Intel Burn Test but it doesn't. The max core temp is 78 in maximum mode. Strange. Have tried another orientation of the cpu fan but it was a bad idea so i have...

@Burpo : Nice deal two boards for 100$ :) I have benched and tried a lot today. Reached 20x200 for 4ghz and ram 1600mhz. I know that you have say to me to leave Uclck and qpi link on auto but it's too slow. I have put a ratio qpi link/uclck 9:8 and uclck= 2xram frequency. I have to put 1.35v...

Thanks. Sorry for bothering you but i have a problem. I reach 191x(22-23) without hyperthreading. I currently use 1.4v max and it seems stable but i encounter a problem with my gpu driver apparently. I have a AMD card R9 280x (HD7970 rebadged) and catalyst stopped working. Tried uninstall and...

Thank you for the reply Burpo. I set uclock and qpi on auto but pll is too hot, leave it at 1.8v. I want to use the 22-23 multi so i go the other way. Underclock the ram instead of overclock it. 22x182 seems to recquire 1.344v and not 1.36. I go for it because i can run burning tests with case...

Hello all ! I just acquired a x5650 and was wondering if it is "safely overclocked". I passed IBT max, OCCT and can't pass prime95 blend test it always fails. I have a lot of questions. Config : - psu corsair cx 600 - P6x58d-premium last bios (1501) - 3x4gb corsair vengeance 1600mhz 9-9-9-24...