Recent content by Pippo

I added an IDE drive to jmicron but i have the jmicron raid application crash; did you experience such a situation? ciao, P.

Thnks everyone! I have the 2 dvd in the ICH7, the PATA in JMicron and the SATA (boot drive) in SATA 1 which is what the manual suggested for this configuration; the problem is that JMicron raid applicaton crashes in startup and actually i didn't mean to do a RAID configuration. In the weekend I...

Thanks MKLN; by disabling the CPU Q-fan the temp were 5 degrees lower according to CoreTemp while Probe 2 showed the temp to be 60 and stayed like that most of the time so even higher than before; looks like probe isn't working well. Furthermore if very often shows the power fan RPM to be 0...

I removed the side panel and used the pc for a short while late in the evening and, as expected, the temps were a few degrees lower but, again, I used the pc only for a short while. I installed coretemp and the temps were in the high sixties, quite different (10 degrees higher) that what...

Yes, In fact I came back to the forum to write about it; I assembled my pc a few weeks ago and for a couple of times, last one yesterday, i had the pc working in strange ways like, for example yesterday evening, i was ariting a memo in notepad and had it repeat like 40 times the same single...

Ciao, hanks for your reply. Actually my average cpu temp is between 61 ad 64 C but ProbeII doesn't give me any warning it does for like 50C on the MB. ciao, Pietro

Morning everyone, Thanks butterbean for your help. I tryed to dl the fw with the Asus utility but keeps telling me that there is no image available on all three servers so i just accessed the server and dl the file in my pc and will use the utility to load it. I solved the problem related to...

Hi guys here is my problem; I assembled my new pc with this MB, 2 GB or Ram, E6600, Seagate SATA 400GB with XP SP2. My problem is that the drive is recognized but the size is limited to 137Gb; I expected to solve the problem by installing SP2 on XP but it didn't affect this issue, in the bios...