Recent content by Phanbot

  1. P

    ARGH! Didnt know the P180 had no power supply!

    I've got a P180B, Asus P5W-DH Deluxe and a Hiper Type-R 550W PSU. The 4-pin power connector is situated at the top rear of the case and the cable just barely reaches the connector.
  2. P

    The *Official* MSI K8NGM2-FID GeForce 6150 Motherboard Thread

    I am trying to set up Raid on the K8NGM2-FID with 2 WD Raptor X's and my problem is that I can configure the raid in bios but when I hit F10 to configure the array, I can select the drives for the array and chose to stripe the drives. When I've finished setting that up and exit out to the main...
  3. P

    Monarch is on a Support Roll

    Their service is starting to go down hill, I ordered a PSU on 9/6/05 and it finally shipped today. I ordered a 80mm fan from Xoxide and it arrived yesterday. I like their prices but they need to start handing out Geritol in the Shipping dept.
  4. P

    939 Motherboard

    I have a MSI K8N Neo2 Platinum and I can vouch that the 1.2 bios fixes the incorrect temp problems that this mb suffered from. Cool N Quiet is enabled with no problems. I had an Asus K8N-E Dlx and Cool N Quiet didn't work for me even after 3 bios upgrades. I was using a Thermalright SLK-948U...
  5. P

    Question - Rate Best Maufacturer of 6800 GT/Ultra card ?

    No one mentioned it so I thought I'd throw it out there that the Asus 6800 Gamer Edition shoudn't even be considered in this topic. It's not a true GT, it's running at the same clock speeds as other GT's but it only has 12 of the 16 pipelines activated. It's really just an overclocked 6800 with...
  6. P

    Zalman and the Neo-FIS2R

    I'm using one on my K8T Neo and it works with no problems...
  7. P

    I give up on the Canterwood

    I've got a AoOpen AX4C Max and it's working with my Corsair XMS3200C2 256MB SDRAM and my AIW 9700 Pro. When I first installed it, I tried setting the memory timings to 2,7,2,2 and I was getting errors while installing XP. I'm currently running with the default settings. I did notice that I am...
  8. P

    *** Official AOpen AX4C/Max (875P) Thread ***

    Another kicker is that if you've got DDR400 memory it only runs it as DDR333. You can only take advantage of DDR400 if you're running a 800 FSB cpu. No matter how much you play with bios your're stuck at DDR333 so start saving up for a 3.0GHz 800MHz P4.
  9. P

    *** Official AOpen AX4C/Max (875P) Thread ***

    I just got my AX4C Max today, installation went fairly quick. I crossed my fingers when I turned it on for the first time, I wasn't sure if it would play nice with my 2 sticks of Corsair XMS3200C2 256MB SDRAM. The Gigabyte SINXP1394 certainly wouldn't boot up with this memory. I'm still at the...