Recent content by Ph1l

I don't think so. I read some about this PSU before I bought it, no problems, voltages stable. Nothing happened from the last time, so it was memory. I'm also sure before switching to another new graphic card I'll also change the PSU, just in case of... look at the tests, before you are...

So as far as I understand, the ORTHOS alone CPU is passing, also same RAM test is passing, but when you hit "CPU&RAM" test it fails?? If it does it seems too small voltage on northbridge,

I think I got it. It's memory!! When I decresed memory voltage from 2.15 to 2.05V everything works fine. I'm after few hours of playing in Splinter Cell which was crashing quite often, and nothing happened... On 2.10V I got BSOD with typical for memory IRQ_NOT_LESS_OR_EQUAL, on 2.25V I got the...

What type of stress are you giving?? Blend (CPU+RAM), only RAM, only CPU. First try RAM if it fails -> you got the answer, then CPU.

I think it's not the problem of the CPU but the small amount of RAM. How much do you have?

All those options are off. It seems the memories are so weak...

I think I'll do soon, now I turned the "PEG Link mode" to Normal from Auto. Strange situaltion also happened when I changed the timings to 5-5-5-15 from 4-4-4-12 on the same rate : 833. On bigger timings the ORTHOS failed after 3 seconds, on lower timings it's going stable whats going on...

The drivers are 93.71 - no modded, the system is totaly new. When I came back to 2.52GHz (9x280) all is OK, but it's not O/Cking

It's Leadtek GF7800GTX Extreme, ASUS P5B Deluxe, Spire 600W

Guys what to do?? It's 9x333 on P5B Deluxe, Geil Ultra 4-4-4-12 @833 Vcore = 1.3625 VDimm = 2.15V FSB term = 1.45V NB = 1.4V SB = Auto PCI = 33.33 PCIEx = 100 ORTHOS test is going over 1h and no errors. SuperPI 1.5 mod = 32M - no problem, but when I enter for example Splinter Cell...