Recent content by Peter Wertz

nerp - the guide that comes with the H170 Pro Gaming board says to use eight screws in the circled holes shown in the diagram to secure the board to the chassis. The diagram only shows six circled holes so I asked ASUS tech support to clarify. Their response was to use Eight but were not to...

I am building on an ASUS H170 Pro Gaming board and have connected the PSU ATX power cables, front panel audio, system panel connectors and case fans to headers. I have NOT installed CPU or memory. When I apply power to test before going further with the build, the standby power LED along with...

Thanks for the responses. Nerp - I think the User Guide is clear on the recommended configuration for a matched pair like you have now. One goes in the same color slot in DIMM A and one in DIMM B. Regards. Peter

I am building on ASUS H170 Pro Gaming motherboard that has four DIMM slots. The ASUS Pro Gaming Guide recommends if using two DIMMs, insert one in DIMM_A2 and one in DIMM_B2. I have read several posts that indicate the Guide is incorrect and my experience has been to use lower numbered slots...

Do you have any more insight into the video delay issue?

Thanks for the response. All the latest drivers and BIOS updates available from Intel are installed. I could not find drivers for the ASUS monitors at ASUS support. I will contact ASUS re any issues like this. I do hear the audio tones for the Intel splash screen (Intel Inside) but no video. If...

I am using an i5-4670 and have used both an ASUS VE228H and an ASUS VS238H-P monitor.

During the first boot on a new system I built using an Intel board, DH87MC, I was unable to get HDMI video output to enable me to get into the BIOS to make the initial settings. Fans spun up, no beeps, and you could hear the Intel startup tone. After a number of unsuccessful attempts, I got a...